Large 133L/m Recirculating Water Chiller with 14.5KW Cooling Capacity-

1 1

Large 133L/m Recirculating Water Chiller with 14.5KW Cooling Capacity-MSK-SDA-1005F

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU:

Quantity:

Note

View full details

MSK-SDA-1005F is a large recirculating chiller designed for the Small Drying Room MSK-ADR-1500EP40-LD, and large induction melders

SPECIFICATIONS

Power Supply	AC 208 -240V; Three-Phase; 60 Hz
Power Input	Maximum Power: 5.2 KW Operating current: 16 A Maximum
Cooling Capacity	14.5 KW or 12,470 Kcal/h or 49.5 K BTU
Compressor	Rotary Compressor Input Power: 3.75 KW Operating current: 10.8 A
External Recirculating Pump	Water Pressure: 20-meter ( 28 PSIG) Water Flow Rate: 8 m^3 / hr; 133 L/min ( 35GPM)
Refrigerant	R22
Temperature Control	5 ~ 30 °C
Temperature Accuracy	± 1 °C
Heating Exchanger	Aluminum Foil Fin + Copper Pipes + External Rotary Venting Fan
Water Tank	50 Liters ( 13.2 Gallon) made of stainless steel ( The water chiller should not be connected to a system with a capacity more than the tank's capacity. Use anti-crossion coolant instead of water for a longer service life. Do not use deionized water as the cooling agent; DI water may cause the copper pipe to corrode, mainly pitting, and leak over time.
Overall Dimensions	1,300 mm (L) x 600 mm (W) x 1,250 mm (H)
Net Weight	220 kg
Compliance	CE approval NRTL or CSA is available upon request at extra cost, please contact our sales representatives for a quote.
Application Notes	The use of tap water is prohibited. Distilled water is preferred to be used in a water chiller. Please connect the chiller water outlet to the equipment water inlet and the chiller water inlet to the equipment outlet. Otherwise, the water flow sensor on the equipment may fail to work due to the wrong water flow direction

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
Any damage and rust resulting from improper storage or maintenance.
Any damages caused by the use of corrosive and acidic gases.
Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.

Manufacturer Part Number: