CM-HIP-2 is a compact internal heating isostatic pressing ( HIP ) Furnace with an 80 ID x 130 H mm cylindrical heating chamber. The furnace can operate under the maximum working temperature of 1200°C and a maximum pressure of 20 MPa under inert gas.
Specifications
|
Power
|
- 208-240 VAC, single phase, 50/60 Hz
- 4.5 kW
|
Chamber
|
- Water-cooled SS 304 chamber
- Sample chamber: Ø80×130H mm
- 25 Mpa pressure transmitter
- 20 Mpa digital solenoid pressure relief valve
- 20 Mpa adjustable mechanical pressure relief valve
- 1/4" compression gas inlet and outlet
- High-quality alumina fibrous insulation
|
Heating Zone
|
- Mo resistance heating wires For inert gases or NiCrAl resistance wire for oxidation gas.
- 4-layer Mo thermal shield
- Max. temperature: 1200°C
- Max. heating rate: 5°C/min 0-1000°C
- 3°C/min 1000-1200°C
- Max. sample size: 70 mm Dia x 130 mm H
|
| Temperature Control |
- 30 segment programmable digital temperature controller
- Over-temperature and thermocouple malfunction protection
- Temperature fluctuation: ±1°C
- C type thermocouple
|
| Pressure Control |
- Up to 20 Mpa at 1200°C under inert gas
- compatible for Ar, N2, 5% H2 blended inert gas, and pure oxygen gases
- Not suggest using H2 gas due to safety concerns
- One 20 MPa solenoid relief valve is controlled by the pressure transmitter
- One 20 MPa mechanical pressure relief valve is installed in case of pressure.
|
Window (Optional
|
- 10 mm observation window is available upon request at the extra cost.
- The window is made of fused quartz with dimension 20 Dx 20 H ( mm)
- Warning: one digital camera must be used to observe through the window to ensure the safety
|
| Water chiller |
- One 58L/min recirculating water chiller is included for cooling flange
-
|
Vacuum pump
|
- One mechanical rotary vane pump is included for the vacuum level of 10E-2 torr.
- A pneumatic KF25 gate valve is included to isolate the pump from the chamber, which requires 4-8 bar compressed gas ( not included)
- One air compressor and gas regulator are required but not included.
|
| Compliance |
- CE Certified
- NRTL(UL61010) or CSA certification is available upon request at extra cost.
|
| Application Note |
- This furnace can be modified into a high vacuum furnace up to 10-7 torr at room temperature via a proper turbopump and ion pump. Please contact our engineering team for details
- Optional: quenching function is available upon request at extra cost.
|
