SP-MGB is an induction meting system in the standard glovebox with gas purification (O2 & H2O < 1 PPM) and a programmable temperature controller. It is excellent for melting air-sensitive alloys, such as Al, Mg, and Li, etc. Its melting temperature range can reach from 750ºC to 1700ºC by choosing different induction power supplies and thermal couples.
SPECIFICATIONS:
Induction Heaters
 
Pic. 1 Pic. 2 |
- Two options of induction power supply
- 80KHz, 7KW, 208- 240VAC, 50/60 Hz, single-phase, for max working temperature of 1200ºC Click Pic. 1 for detail specifications)
- 80KHz, 15KW, 208- 240VAC, 50/60 Hz, three-phase, for max working temperature of 2200ºC
Click Pic. 2 for detail specifications)
Must inform us of your max. working temperature when you ask a quotation
|
- Glovebox
|
- Glovebox Case is made of stainless steel 304 with 3 mm thickness
- Chamber dimension: 1200 mm L x 740 mm W x 900 mm H
- Openable front window panel (tempered glass, 8 mm thick)
- Gas purification system with automatic purging and regeneration function
- Gas purification: O2 < 1 ppm and H2O < 1 ppm
- Click Pic left to see detailed specification)
|
Induction Coil & Crucible
|
- Water cold Induction coil with 200 mm ID is placed inside the glovebox via feedthrough (Pic. 1 & 2 )
- Graphite crucible with the dimension of φ114 OD x φ100 ID x 142 H (mm) is included (Pic. 3)
- A thermal couple with a support fixture is included for controlling the melting temperature
- 5" OD Quartz tube chamber is available for vacuum function at the extra cost (Pic. 4)
- K type T/C for 750ºC - 1200ºC
- B type T/C for 1200ºC - 1700ºC
- C type T/C for > 1700ºC , upto 2200ºC
 Pic. 1  Pic. 2  Pic. 3  Pic. 4 |
Temperature Controller
|
- Precision digital temperature controller with Automatic PID tuning
- 30 segments programmable for controlling heating and cooling rate as well as dwell time
- Overheating & thermocouple failure protection
- +/- 2 ºC temperature accuracy
- One the thermal couple is included and T/C type is dependent on max. melting temperature
|
Water Chiller
 |
- Temperature range: 5 - 30°C
- Water Flow Rate: 58 L/min
- Water Tank: 15 Liters made of stainless steel
- Note: It is recommended to use a specific coolant to get the best performance. It is normal to wait a couple of minutes for cooling down after several trials of heating
- Note: the input voltage for the water chiller is 220V
|
| Warranty |
- One year limited warranty with lifetime support
- Consumable parts such as processing tubes, o-rings, and heating coil are not covered by the warranty
|
| Compliance |
- NRTL or CSA Certification is available upon request at an extra cost
|
| Operation Video |
 |
