KSL-1200X-L5 is a five-sided heating muffle furnace designed for annealing superalloys and precious metals with a more uniform temperature zone. A SiC sheet is installed on the bottom of the chamber, which can load heavy samples up to 100 kg.
SPECIFICATIONS
Structure
|
- Five sides heating ( left, right, front, back, and bottom ) to achieve a more uniform temperature zone.
- One SiC sheet is placed on the bottom of the chamber ( top of the heating element ) to support heavy sample load up to 100 kg.
- Double temperature controller to ensure the furnace never overshoots
- Thermally efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
- Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
- Built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
|
Power
|
- Voltage: AC 208 - 240, three-phase, 50/60Hz
- 12KW Watts
- 50A breaker
- Note: Power cable included, but without the plug. Please install a plug on your own
|
| Heating Chamber |
- Chamber size: 16'x16"x16" ( 400 x400x400 mm)
- Capacity: 2,25 cubic foot, ( ~64 L)
- Five sides heated by NiCrAl resistance coils with max temperature uniformity ( +/- 3oC at uniform temp zone)
- Max. loading: 100 Kg
|
|
Operating Temp Range
|
- 100-1100°C-Max continuously
- 1200°C-Max under an hour
- Note: for using =>1000°C, the furnace block must be placed front chamber.
|
|
Stability at 1000oC
|
|
|
Uniformity at 1000oC
|
- +/- 3°C @300°C and 1000°C in the center 300 × 300 × 300mm area
|
|
Max. Heating Rate
|
|
Temperature Controller
|
- A digital temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1ºC temperature control accuracy
- The default DB9 PC communication port
|
Optional +/- 0.1ºC Controller
|
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller, which is fully compatible with LabVIEW and provides +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485-USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
|
Laptop, software & WiFi (Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30-day free trial) for immediate use.
-
LabVIEW-Based Temperature Control System (EQ-MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
|
Gas Inlet and Outlet
|
A 1/4'' Barbed Gas Inlet/Outlet is installed on the back of the furnace. |
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost.
|
| Application Notes |
- This furnace is not vacuum-sealed; toxic or explosive materials and gases are not recommended for use with this furnace without the necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence, and the cracks may be repaired with alumina coating.
- Optional
|
