KSL-1200X-MAX is a 5-side heating muffle furnace (20x20x20") with a working temperature of up to 1200 degrees. The 5-side heating chamber with freestanding heating elements provides better temperature uniformity, a higher heating rate, and reduces the downtime of heating element replacement. It is a perfect instrument for sintering and annealing large quantities of metals and ceramics. The optional refractory alloy chamber provides an economical approach to anneal samples in a controlled atmosphere, limiting cross contaminations, and especially removing binders in ceramics without contamination.
SPECIFICATIONS
| Power |
- Power: 12 kW, three-phase, 208-240VAC (40 A power outlet is recommended)
- Other voltage ratings are available upon request.
- A power cord with a plug is included.
|
Heating Chamber
|
- Size: 20" x 20" x 20" ( 500 x 500 x 500 mm)
- Capacity: 125 liters
- Uniform temperature zone: 200x200x200mm +/- 2ºC
- Heating element: Freestanding Ni-Cr-Al wire
- Thermocouple: K type
- Double-sided alloy casing with cooling fans.
The surface temperature of the furnace is less than 40°C @ 1000°C in the furnace.
|
| Working Temperature |
-
| Working Temperature:
|
-
1200 °C continuously without an alloy chamber
- 1000°C continuously with an alloy chamber
|
| Heating rate: |
|
| Stability: |
|
|
|
Temperature Controller
|
- The FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default RS485 PC communication port
- Eurotherm temperature controller with +/- 0.1 accuracies is available at the extra cost
|
Refractory Alloy Chamber for Debinding (Optional)
|
- 310SS alloy chamber with a hinged door
- Size: 415 D × 372 L × 372 W (mm)
- Capacity: 57.4 Liter
- 12.7 mm OD gas inlet tube is at the back of the furnace
- 30 mm ID (40 mm OD) gas outlet tube is connected to the top of the furnace
- K-type thermal couple is inserted into the inside chamber for temperature control
- Max. working Temperature: 1000°C
- Alumina fiber packing is installed as the door sealant.
- Note:
- This is not an airtight chamber. However, it prevents the majority of vapors
- For oxygen-sensitive material, suggest use 5%H2 + 95% Ar to keep the sample from oxidation
|
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
