KSL-1700X-A3 is a bench-top high-temperature muffle furnace with CE certification and all electric parts inside the furnace are UL listed and ready to pass UL or CSA certificate. The furnace consists of high-quality alumina fiber bricks and MoSi2 heating elements with a chamber of 10"x10"x12". It is an ideal tool for annealing and sintering materials in research or dental labs.
SPECIFICATIONS:
|
Furnace Structure
|
- Double shell steel case with a cooling fan can keep the outside case cool
- High-purity alumina fiber insulation for max. energy saving
- A newly designed retention latch provides a more safe working environment (Please click the left picture for details
|
|
Power
|
9.0 KW
|
|
Voltage
|
AC 208V-240V single phase, 50/60 Hz (50A air breaker required)
Note: Plug is not included, and it is suggested you use NEMA L5-30 / NEMA 10-30P plug for AC 110V and NEMA 6-20P plug for AC 208~240V)
|
|
Standard Working Temperature
|
1600°C or 2912° F (continuous)
|
|
Maximum Working Temperature (in different atmospheres)
|
- 1700°C (3092°F) in air <3 hours
- 1650°C (3002°F) in N2
- 1170°C ~ 1450°C (2138°F ~ 2642°F) in H2
|
|
Heating Rate
|
0~10°C / min (suggestion = 5°C)
|
|
Temperature Accuracy
|
+/- 1° C
|
|
Temperature Uniformity
|
- +/- 7°C @ 1000°C @1000°C in the center 100 x 100 x 100 area.
|
|
Heating Elements
|
Super 1800 grade MoSi2 (30 x 420mm)
|
|
Thermocouple
|
B-Type (Pt-Rh to Pt-Rh) with Alumina tube
|
Temperature Controller
|
-
FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
- MET Certified
|
Temperature controller (optional)
|
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm 3004 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3004 programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm 3004 temperature controller.
|
Laptop, software & WiFi Control(Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) f.
-
Labview-Based Temperature Control System (EQ-MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
-
Note: The software is only compatible with MTI’s Yudian Temperature Controller
|
Optional
|
1/4" barbed Gas Inlet/Outlet can be installed on the back panel of the furnace ($200.00/ea.)
|
Compliance |
CE/UL/CSA Certified
NRTL or CSA certification is available upon request at the extra cost
|
|
Application Notes
|
- For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.
- The cooling rate shall also not exceed 10 °C /min.
- This furnace lacks vacuum sealing, and toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
-
|
