KSL-1700X-MGI-8-AD consists of eight box furnaces together for high throughput heat treat processing of new material discovery. The temperature of each heating chamber is controlled independently up to 1700℃. The door of each furnace is automatically opened and closed as programmed via a touch-screen computer. Combined with a robot arm, the furnace system can work 24/7 autonomously.
SPECIFICATIONS:
|
Furnace Structure
|
- Integrates eight box furnaces ( 120x120x120 mm ) for space and energy saving
- Each heating chamber is independently temperature controlled, with a maximum temperature of 1700℃
- Can simultaneously accommodate four samples for heat treatment at different temperatures
- The door of the heating chamber can open and close automatically as programmed for sample loading and unloading
- An optional robot arm is available for 24/7 autonomous operation
|
| Specifications |
-
Voltage: AC220V+/- 10% 50/60HZ, Single-phase 220V
- Power: 20 KW
- Heating rate: ≤10/min
- Chamber size: 120*120*120mm ( capacity 1.7 L )
- Effective uniform heating space: 80x80x80 mm within +/- 5oC
- Heating element: MoSi2
- Thermocouples: B-type
- 8 gas inlets are installed at the back of the furnace
|
|
Working Temp.
|
- Continuous Working Temperature: 1600°C
- Maximum Working Temperature 1700°C (< 30 mins)
- Maximum 1750°C upon request at extra cost
|
|
Control of Temperature and door
|
- Touchscreen temperature and door control
- Eight independent temperature control channels enable simultaneous one-touch control
- PID automatic temperature control system
- Intelligent 50-stage programmable control
- The door of each heating chamber can be opened or closed as programmed via the touch screen panel
- Default DB9 PC communication connection port for robot operation
- Temperature control accuracy: ±1. (optional European temperature control accuracy up to ±0.1)
|
|
Automation option
|
- A robot arm and sample tray station may be connected with the 8 chamber furnace to achieve operation autonomously.
- Call MTI for your automation application
|
| Compliance |
- CE certificated
- NRTL certification is available at an extra cost
|
|
Warning &
Application note
|
-
MTI does not recommend customers use flammable, explosive, or toxic gases(materials). MTI is not responsible for issues arising from the use of flammable, explosive, or toxic gases(materials)
-
The equipment should operate on an independent power source, with a voltage range requirement within ±8%. It should not share the power grid with equipment generating high magnetic fields like medium- and high-frequency devices. It should not be in the same room as such equipment.
- Keep the equipment away from areas prone to liquid splashing
- Keep the equipment away from areas with magnetic or conductive powders
- Cracks in insulation material during sintering are normal; they can be repaired using patching agents. Heating elements are also consumables. If the electric furnace cannot reach the working temperature or shows a significant slowdown in heating after prolonged use, contact the manufacturer to determine if replacement is necessary
- There might be temperature fluctuations during low-temperature(below 300) operation
- DO NOT open the furnace at temperatures exceeding 500
|
