This electrode sheet is based on Aluminum foil coated by lithium ferrous phosphate. Double side coating and is used as the cathode of Li-Ion battery -- 5 sheets /bag
Note: This electrode sheets and its papameters were updated from Oct. 2023.  

Specifications

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium ferrous phosphate (coated by carbon)
• Length: 241mm, Width: 175mm. The edge width of blank area is 12.5 mm for each side.  
• Total Thickness: 124-164 um (after hot calendaring)
• Double Side Coating Area Density: 27.0±0.4 mg/cm2
• Compaction Density of Coating: 2.3±0.1g/cm3
• Coating thickness: 117.4 um
• Total thickness: ~133.4 um
• Active Material Weight: 10.86 g
• Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
• Specific Capacity: 150 mAh/g (Area Capacity: 3.864 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
• Charging and Discharging Curve for the First Cycle
• 
• Rate Testing
• 
• Cycling Test
• 

Note:  The electrode sheet shall be stirred in vacuum box, vacuum oven or glove box to avoid degradation

Please click the video below to see how        
MTI's slitting machine preparing                       Please click the video below to see how 
the electrode of cylinder batteries                           MTI's MSK-T-10 disc and ring cutter to cut electrode sheet

                               

                                

Related Products:

Other Li-ion Battery Electrode

Vacuum Storage Box & Oven

Vacuum Drying/Bake-out Ovens

Coin Cell Assembling

Pouch Cell Assembling

Cylindrical Cell Assembling

Battery Testing