1 3

High Speed Dispenser of Slurry for High Quality Roll to Roll Coating - MSK-SFM-21

High Speed Dispenser of Slurry for High Quality Roll to Roll Coating - MSK-SFM-21

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details

MSK-SFM-21 is a high-speed slurry dispenser, which is designed for further homogenizing and dispersing of the mixed slurry for high-quality R2R coating, especially for coating nanoscale material by slot die method or larger Roll to Roll web coater. . It can be widely used to prepare Li-ion battery electrode or many ceramic coating

SPECIFICATIONS

Features
  • Controllable feeding and dispensing speed and time.
  • Optional water cooling system and temperature control system.
  • PLC touch screen operation system.
  • Can dispense the slurry continuously or recirculating. 
Working Voltage 380V AC, 50 Hz, three phase.
208VC three phase is available upon request
Input Power  5 kW.
Feeding Speed 0 - 10 Liter/h adjustable
Dispersing Speed 0 - 50 m/s. adjustable
Feed In/Out Temperature  <40 °C.

Slurry Feeder
  • 4 L Capacity
  • Pneumatic airtight slurry reservoir.
  • 5.2 to 3699 mL/min, adjustable
  • Stirring Speed: 27RPM Max
  • 0.5~0.8MPa compress gas is required , but included
Dispensing Chamber
  • Capacity: 80 mL (other sizes of chambers are also available).
  • Chamber material: SUS316,PTFE,EPDM.
Material Requirement 0 ~ 50000 mpa.s (or lower the mixing speed for more viscous slurry).
Optional The water chiller (> 200L/minute ) is required at extra cost. You may order two water chiller by click picture below
Working Environment
Stationed on a hard and leveled surface, no electromagnetic interference.
Compliance

 

×

Dimension:

  • Slurry Feeder:   650 × 800 × 1000 mm (L × W × H).
  • Dispenser:         500 × 600 × 700 mm (L × W × H).

Net Weight:

  • Feeder: 350 kg.
  • Mixer: 70 kg.

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: