1 2

1.7 MHz Ultrasonic Atomizing Generator with Digital Syringe Pump and Heating Function - MSKUSP17SP

1.7 MHz Ultrasonic Atomizing Generator with Digital Syringe Pump and Heating Function - MSKUSP17SP

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details
MSK-USP-SP-LD is a 1.7 MHz Ultrasonic Particle Generator with a digitally controlled infusion syringe pump and a temperature controller. It can be used in line with MTI Tubing Furnaces to form a versatile synthetic system for nanostructured oxide materials.

SPECIFICATIONS
Voltage
  • 110 - 240VAC for universal use
  • 24VDC driving ultrasonic generator
Work
  • 30W
System Features
  • A 316 Stainless Steel liquid container is equipped with a fluoropolymer sealing ring and a heating tape
  • 1.7 MHz ultrasonic generator
  • 3 levels of power output ( low, middle, high)
  • Droplet size: < 10 microns, which is dependent on the viscosity of solution, ultrasonic frequency, gas speed.
  • Continuous mode and timed mode can be set. For timed mode, time can be adjusted from 30 minutes to 180 minutes
  • The quick clamps allow easy removal of components for cleaning or adapting the device with simple connections to the gas supply
  • A liquid injection pump is included and equipped to inject automatically which comes with a 60 ml plastic syringe. 
Digital Syringe Pump
  • Holds small or big syringes from 10 uL to 60 mL
  • Pumps continuously until you stop the pump
  • The infusion rate can be changed while pumping
  • Remembers previous settings on power-up
  • Power failure mode allows the pump to continue pumping after a reset
  • Displays total volume dispensed in mL or µL units
  • The pumping rate range:6.1um/min - 120um/min
  • The pumping rates are various from 3.9uL/min to 76.5mL/min upon the sizes of syringe
  • Precise reproducible flow rates
  • Selectable infusion rate units: mL/hr, µL/hr, mL/min, µL/min
  • Infuses Only, does not withdraw, volume target, or have a computer interface
  • An infusion Syringe Pump with an optional Heatable Glass Syringe is available at an extra cost

Temperature Controller
  • The controller uses PID via SSR power control
  • Single-point setting controller
  • Over-temperature protection and alarm allow for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  •  A K-type thermocouple with 3mm OD x 4" L is included in the standard package.

Heating Tape
  • Length: 24" 
  • Width: 1/2"
  • Input Voltage: 120V AC
  • Max Power: 105W
  • Max. Working Temperature: 250°C
  • Electric insulation Fiberglass
  • Power Plug: included
Application Notes
  • An MFC can be connected to the upstream to control the carrier gas flow rate. ( Pic. 1)
  • The ultrasonic particle generator can be used in line with MTI Tubing Furnaces and Electrostatic Precipitators to form a versatile synthetic system for nanostructured oxide materials. Please click picture 2 to view the details
Pic. 1  Pic. 2

×

Dimensions Info:

Control Unit: 260mm (L) x 190mm (W) x 90 mm (H)

Liquid Syringe: 260mm (L) x 200mm (W) x 160mm (H)

Ultrasonic Particle Generator: 240mm (L) x 220mm (W) x 395mm (H)  

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as Graphite dies, O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: