• 208 - 240V AC (single-phase), 50/60 Hz
• 220V AC Power plug is not included. Please click here to order the plug).
• Power: 750W
• If you would like to operate it at 110V, you may choose a > 1000W transformer (click here to order)

• Plate Revolution: 0-290 RPM; Centrifugal acceleration: 14 g Max. 
• Mixing Jar Self-Rotation: 0-580 RPM; Centrifugal Acceleration: 23 g max

Touch screen

controller

• A built-in touch-screen controller
• Manual Operation and Program Operation are available
• Operating Time Range: 0-6000 minutes
• Number of Cycles: 0-999 cycles
• The rotation speed, operation duration, rest time interval, rotation direction (forward or backward), and number of cycles can be selected and input from touch screen controller.
  

• Jars and balls are available at an extra cost. 
• Various optional jars and balls are listed below, up to 500mL. 
• 4 sets of Jar with o-ring sealing are recommended for most materials.  Please be advised that you may pre-milling material to form a coating on the inner wall of the jar to avoid contamination from jar to sample
• Four jar holders and clamps can accommodate jar sizes up to 107mm O.D x 112mm H
• 8x25ml Hi-throughput Jar is available upon request, which can mill 32 samples per batch via 4 jars )
• Note: How to achieve finer or desired particles via ball mill is a research project, which is depended on the material to be mixed, grinding time and speed, combination of grinding jar and milling ball, etc. It is your responsibility to find the best milling procedure based on your material. Welcome you come to MTI lab at California to do the test before purchase
• Maximum Sample Loading Volume: 75% volume of Mixing Jar volume (included the volume of milling balls)

500ml Alumina Jar	500ml SS304 Jar	250ml SS304 Jar	1000ml SS304 Jar
500ml Agate Jar	500mL Nylon Jar	Optional vacuum SS304 Jar	8x25ml Hi-throughput Jar
Alumina Milling Balls	SS 304 Milling Balls Combo	Agate Milling Ball	Tungsten Carbide Milling Ball
Zirconia Milling Balls Combo:	YSZ Milling Ball: Same Diameter

• Suggested the sample granularity ≤ 2 mm. Prior to ball milling, grind the sample and sieve it to achieve the required particle size.

• CE Certified
• NRTL certification is available at an extra cost

• Must place 4 jars or 2 in symmetrical with similar weight in the ball mill to keep balance during rotation, If using one jar, you must put another jar with the same weight in a symmetrical position. Otherwise, unbalance rotation, especially one jar, may damage the machine
• For optimal ball milling performance, MTI highly recommends the sample diameter to be less than 2.0mm. It is highly advised to use a 20-meh sieve to filter sample prior to ball milling
• If you need a forced-air cooling jar for some ductile materials, please click the picture below to order a Portable Spot Air Cooling Conditioner, which will keep the milling jar's temperature below 30°C
• Please consider our SYU-3 Ultrasonic Filtration System for filtering the product

     

• Please click underline to learn Centrifugal Force calculation