OTF-1700X-6Z- is a six-zone split tube furnace with an alumina tube and vacuum-sealed flange working up to 1700°C. Six 30 segments of temperature controllers are installed with B-type thermal couples and +/ - 1°C accuracy. PC operation via software is available upon request
SPECIFICATIONS:
| Power Input |
30 KW |
| Working Voltage |
AC220+/- 10% VAC three-phase 50/60Hz
( 100 A breaker required)
380V, 3 phase is available via a transform upon request at extra cost |
| Working Temperature |
Max. 1700°C 30 minutes
Continuous: 800 -1600°C
|
| Recommend Heating rate |
5°C/min. |
| Processing Tube flange |
Material: Alumina
Size: 60 O.D x 51 I.D x 1800mm L
One set of vacuum flange is included for atmosphere control
Vacuum level10E-2 torr by a quality mechanical vacuum pump and 10-5 torr by turbo-pump
|
| Heat Zone Length |
-
Six heating zones: 12" +8" + 8" + 8" + 8" + 12"
- Total heating zone length: 1422 mm ( ~ 56")
-
Constant Temperature Zone: 800 mm +/- 5ºC. ( If set 6 zones at the same temperature, without zone spacer. If you don't need the zone spacer, you shall inform us in advance)
-
The Built-in heating zone space creates a thermal gradient up to 100ºC/ cm
|
Temperature Controllers
|
6 digital temperature controllers for controlling each heating zonePID automatic control with 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.Built-in overheating & broken thermocouple protection. 6 pcs B type thermal are included.+/- 1 ºC temperature accuracy.RS485 Communications Port.Optional:
- The furnace may be operated by PC by installing a control module. Please order an MTS-02 control module at extra cost.
- If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you order a computer laptop from us to avoid software installation problems. For more information please click here.
|
Laptop & software (Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
-
Labview-Based Temperature Control System (MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
|
Thermal Block Placement |
-
Two thermal blacks are included. Please click the picture below to learn how to place them inside tube
- You may order flange support to avoid tube rotating ( click Pic below right )
|
Heating Elements
|
- 48 pcs 1800ºC grade MoSi2 rod
- The heating element is consumable, Please click the picture below to order a spare and replacement.
- Six S-type thermocouples (one for each zone).
|
Application Notes |
- The tube furnaces with mullite tubes are designed for use under vacuum and low pressure < 0.02 Mpa
- Never use graphite crucible and the alumina tube.
-
Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.
- The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
-
Vacuum pressures may only be safely used up to 1300°C for all mullite tube furnaces:
- Customized long heating zone up to 1200 mm L with 700 mm uniform temperature zone ( +/- 5°C) 1800mm mullite tube is available upon request; ( click the picture below to see sketch)
|
| Compliance |
- CE Certified
-
NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
