1 6

Automatic Stacking Machine with Functions of Taping and Cell Collection for Pouch and Prismatic Cells up to 160x100 mm - MSK-111A-ARM

Automatic Stacking Machine with Functions of Taping and Cell Collection for Pouch and Prismatic Cells up to 160x100 mm - MSK-111A-ARM

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details

MSK-111A-ARM is a fully automatic stacking machine for prismatic and pouch cells with advanced features to ensure stable, repeatable, and precise electrode stacking. The functions of automatic taping and cell collection are also available. Utilizing the "Z" fashion stacking technique, alternating layers of anode and cathode electrodes are interleaved with separator films.

The layout inside the automatic stacker MSK-111A-ARM is shown below:


SPECIFICATIONS:

Features
  • Consistent tension controls for separator film delivery
  • "Z" fashion stacking with a separation via a foot-switch
  • Manually slidable fixtures enable accurate positioning and compactness of electrodes
  • Unreeling rotors for separator film feeding adjusting fixture position
  • Various sizes of the electrode are acceptable
  • Automatic counting & zeroing for the numbers of the stack
Working Voltage
  • Single Phase, AC220V±10%, 50/60Hz
Power
  • 5000W
Stacking Electrode Size
  • Length: 50 ~ 160 mm
  • Width: 40 ~ 100mm (tab direction)
  • Thickness: Max. 20 mm 
  • The standard stacking die size L56mm *W43 mm (cathode) and L58 mm*W45mm (anode) is included. Other customized sizes can be provided upon request.
Max. Electrode Thickness
  • Piled up thickness 2~30mm
Aligning Accuracy
  • ±0.3 mm for stacked electrodes
Acceptable Separator Roll Size
  • 400mm O.D Max.
Core of Separator Roll
  • 3-inch core, mechanical clamping
Acceptable Tape Roll Size
  • 150mm O.D Max. (3" core, width: 10 mm)
Cutting Blade
  • L170 mm, Max. heating temperature: 220℃
Suggested Air Pressure 0.6 - 1.0 MPa
(Air compressor is not included in the standard package. Please click here to order)
Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
pic1  pic2
Compliance CE Certified
NRTL or CSA certification is available upon request at the extra cost

 

 

×

Dimension Info:

  • Product Dimensions: 1750mm x 1050mm x 1900mm (L x W x H)
  • Net Weight: 800kg

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: