KSL-1700X-S-H is a1700ºC max. compact hybrid furnace that can be used as a 1.7L ( 12x12x12cm ) muffle furnace and a 1" ID " tube furnace. It is a cost-effective and space-saving solution for material processing labs.
SPECIFICATIONS:
Furnace Structure
|
- The design of the drop-down door makes it easy to load samples as a compact box furnace
- One 40 mm hole is opened in the front of the door to insert a 40 mm OD x 30 mm ID alumina tube with flanges as a tube furnace
- 1800oC grade MoSi2 heating elements inside
|
Power
|
- AC 208V-240V single phase, 50/60 Hz ( 20A air breaker required)
- 2.5KW
- Note： Power cable included but without the plug. Please install a plug on your own or click the picture left to choose a plug according to your country or your lab requirement
|
Heating Chamber
|
- Heating Elements: SiC (4 pcs U shape)
- Chamber size: 120 x 120 x120 mm
- Working Temperature: 1700ºC Max.
- Heating Rate: 0 ~20°C / min (suggestion =< 10°C)
- Thermal block: Two thermal blocks made of fibrous alumian are included in the front door when used as a box furnace
|
Processing Tube
|
- One alumina tube is included with a dimension of 40 OD x 30 ID x 700mm L ( ( OD 1.57" x ID 1.18" x L 23.6" ) Pic. 1
- One set of vacuum flange with valves of gas inlet and outlet, KF25 vacuum port, and mechanical vacuum gauge ( Pic. 2)
- Mx. vacuum 10-2 torr by mechanical pump, and 10-5 torr by turbo-pump
- Two thermal blocks for alumian are included. Pic.3
|
Temperature Controller
|
|
Laptop & software (Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30-day free trial) for immediate use.
-
Labview-Based Temperature Control System (MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- A wireless remote control provides up to 200 meters of operating range.
|
|
Compliance
|
- CE Certified
- The furnace is ready to pass TUV(UL61010) or CSA certification at an extra cost.
|
|
Attention Notes
|
- For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min. The cooling rate shall also not exceed 10 °C /min.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
|
