1 6

1200°C Hybrid Muffle (6" x 6" x 7") and Tube Furnace (2" or 4" OD) - KSL1200XJH

1200°C Hybrid Muffle (6" x 6" x 7") and Tube Furnace (2" or 4" OD) - KSL1200XJH

Minimum Order: $20 (equipment), $100 (crystals)

Low stock: 3 left

$9,187.35 USD
$9,187.35 USD
Sale Email for Lead Time

SKU:  KSL-1200X-J-H

Tube Size
View full details

KSL-1200X-J-H is a hybrid Muffle/Tube Furnace with 1200 Max working temperature. It has a heating chamber of 6"x6"x7" as a box furnace and a 2” or 4" OD quartz tube with a flange can be inserted from the top as a vacuum tube furnace. It is 2 in 1 cost-effective solution for material processing.

SPECIFICATIONS:

Structure
  • High purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency. 
  • Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch. 
  • Doble layer steel case with forced-air cooling to ensure lower safer surface temperature.
  • One 2" or 4" Dia. hole is opened from the top of the chamber with a thermal insulation block
  • When used as a tube furnace, a quartz tube with a flange will be inserted into the heating chamber.
Heating Chamber
  • Dimensions: 150mm(D) x 155mm(W) x 180mm(H), ( 6"x6"x7")
  • Capacity 4.2 Liter or 0.44 cubic ft
  • Working Temperature: 100-1200 °C continuously in the air or inert gas. ( 1000 max if used in vacuum )
  • Heating rate: 30°C/ min.
  • Temperature Stability: +/- 1.0 °C
  • K types thermocouple with Ceramic Sheath
 Processing Tubes
 Tube Installation
Pic. 1Pic. 2Pic. 3Pic. 4Pic. 5
Temperature Controller
  • The digital temperature controller is included.
  • Proportional–integral–derivative control (PID control) and auto-tune function
  • 30 segments programmed with ramping, cooling, and dwelling steps
  • Built-in over-temperature alarm and thermocouple failure alarm
  • +/- 1 ºC temperature control accuracy
  • Default DB9 PC communication port
Three-Electrode Configuration (Optional)
  • 4" quartz tube, 100 OD x 94 ID x 210 L (mm)
  • Three copper electrodes (Ø2.38) with copper connectors for any type of electrode, up to 55A
  • DN16KF port as gas outlet or vacuum. 
  • 1/4" compression tube fittings
  • Max. vacuum: 10-2 torr by a mechanical pump or 10-5 by a turbo pump
  • Max. pressure: 3 psig
  • One alumina thermal block.
Temperature controller (optional)
 
Power
  • Voltage: 208 -240V Single Phase 50/60 Hz
  • 2.5KW
  • 110V version is available at an extra cost
  • Note: The Power cable is included but without a plug. The plug would have to be installed by the customer, or click the link below the picture to choose a plug according to your country or your lab requirement
Compliance
  • CE Certified
  • NRTL (UL61010) or CSA certification is available upon request at extra cost.
Application Notes
  • For a longer service life of the furnace, we recommend not exceeding the heating rate of 10°C/min.
  • The cooling rate should not exceed 10 °C /min either.
  • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence, and the cracks may be repaired with the alumina coating 
  • The heating module is easy to replace. Click the pic left to order the spare Heating module for replacement
  • If firing material releases vapor or smoke, please place the furnace into a fume hood. 

 

×

Dimension:

  • 360mm(L) x 300mm(W) x 510mm(H)  

Net Weight:

  • 62 lbs

Shipping:

  • Shipping Weight: 115 lbs
  • Shipping Dimension: 40"x30"x36"

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: 

Related Products

Loading related products...