This electrode sheet is based on Aluminum foil coated with lithium ferrous phosphate. Double-sided coating is used as the cathode of Li-Ion battery -- 5 sheets /bag
Note: These electrode sheets and its papameters were updated from Oct. 2023.  

Specifications

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium ferrous phosphate (coated by carbon)
• Length: 241mm, Width: 175mm. The edge width of the blank area is 12.5 mm for each side.
• Total Thickness: 124-164 um (after hot calendaring)
• Double Side Coating Area Density: 27.0±0.4 mg/cm2
• Compaction Density of Coating: 2.3±0.1g/cm3
• Coating thickness: 117.4 um
• Total thickness: ~133.4 um
• Active Material Weight: 10.86 g
• Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
• Specific Capacity: 150 mAh/g (Area Capacity: 3.864 mAh/cm2); 0.1 C; 2.5-3.7 V; Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
• Charging and Discharging Curve for the First Cycle
• 
• Rate Testing
• 
• Cycling Test
• 

LiFePO4  Aluminum 

Note: The electrode sheet shall be stirred in a vacuum box, a vacuum oven or glove box to avoid degradation