This electrode sheet is based on Aluminum foil coated by LiMn0.6Fe0.4PO4 (LMFP) on double sides and mainly used as the cathode of Li-Ion battery - 5 sheets /bag

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: LiMn0.6Fe0.4PO4 (LMFP) 
• Length: 241mm, Width: 175mm ( The edge width of blank area is 12.5 mm for each side)
• Double Side Coating Area Density: 28.0 ±0.2 mg/cm2
• Compaction Density of Coating: 2.3 g/cm3
• Coating thickness: ~68 um
• Total Thickness: ~151 um (after hot calendaring)
• Active Material Ratio in powder: 95.4% (PVDF and Super P is 2% and 2.6%, respectively)
• Specific Capacity: 154 mAh/g (Area Capacity: 1.932 mAh/cm2); 0.1 C; 2.5-3.7 V;  Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
• Charging and Discharging Curve for the First Cycle
• 
• Note: Please vacuum heated dry (80-100oC) before assembling the battery
• 
  

for aluminum     

for LiFePO4