This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide on a single side and is used as
the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

• Material:  LiNiCoMnO2  5:2:3)
• Current collector (substrate): Aluminum foil (15 microns)
• Cathode material: Lithium Nickel Manganese Cobalt Oxide
• Coated Area: 241mm L x 200mm W. The edge width of blank area is 12.5 mm for each side.  
• Single sides material density: 11.5 mg/cm2
• Compaction density: 3 g/cm3
• Active Material Weight: 5.4939g
• Active Material Proportion in Powder: 95.5% (PVDF and Super P is 2% and 2.5%, respectively) 
• Specific Capacity: 155 mAh/g (Area Capacity: 1.774 mAh/cm2) [0.2C, 4.2-2.7 V vs Li/Li+, Half Cell]
• Average Cycle Life: 500 Cycles @ 0.2C Charging/Discharging Rate [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]
  
• Length: 241mm
• Width: 200mm
• Total Thickness: 60um +/- 3um
  Foil Thickness: 15 um +/- 3um
• Coating Thickness: 45um +/- 6um
• Net Weight: 19.5g
• Single side coated
• Qty: 5 sheets/bag
  Note:  The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation.