This electrode sheet is based on Aluminum foil coated by lithium-cobalt dioxide in single side and is used as the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium-cobalt dioxide
  
• Single sides area density: 11.5 ± 0.2 mg/cm2
• Compaction density: 3.5 ± 0.1 g/cm3
  
• Coated area: 241mm L x 175mm W. The edge width of blank area is 12.5 mm for each side.
• Coating thickness: ~ 33 um
• Total thickness: ~50 um
• Active Material Proportion in Powder: 96%
• Specific Capacity: 180 mAh/g, 0.1C Charging/Discharging Rate
• Single side coated
• Qty: 5 sheets/bag
• Warning:  Please dry in vacuum oven before using and store it inside the glovebox after opening the package. The recommended temperature and time can be 80-120 °C for 6-12h.
•  for LiCoO2
  
  
• for Aluminum