• 1200C 4-Zone Tube Furnace w/ Touch Screen Controller & Optional Quartz Tube & Flanges ( OD 80 -130 mm) - OTF-1200X--OD
1 6

1200C 4-Zone Tube Furnace w/ Touch Screen Controller & Optional Quartz Tube & Flanges (OD 80 -130 mm) - OTF-1200X-IV

1200C 4-Zone Tube Furnace w/ Touch Screen Controller & Optional Quartz Tube & Flanges (OD 80 -130 mm) - OTF-1200X-IV

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details

  OTF-1200X-IV is a Four-zone split tube furnace that can create a smooth thermal gradient or one uniform constant temperature zone by adjusting the four-zone temperature up to 1200oC with a 900 mm long heating zone. The furnace includes one quartz tube with optional OD of  80, 100, or 130 mm OD, and one pair of vacuum sealing flanges with pressure gauge & ball valve for immediate use. 
   Touch Screen temperature controller is installed for easy programming with 30 segments and +/- 1 oC accuracy. It is an excellent furnace for annealing, diffusing, and sintering samples in various atmospheres.   

Specifications:

Furnace structure
  • Double-layer steel case with two cooling fans, which ensures a low surface temperature.
  • Energy-saving high-purity fibrous alumina insulation.
 Power
  • AC 208-240V Single Phase, 50/60 Hz (50A breaker required)
  • Power consumption 7 KW Max.
  • A power cord is included without the plug
 WorkingTemperature
  •  Max.                          1200  oC < 1 hr.
  • Continuous :               1100  oC
  •  Max. Heating Rate:   <= 20  oC /min
 Quartz Tube
  • Three Types of quartz tubes are available as in the product option 
    • OD 80 x  ID 74 x L 1400  ( mm)
    • OD100 x ID 94 x L 1400 ( mm)
    • OD 130 x ID 124 x L 1400 ( mm) 
  • Two fibrous ceramic tube blocks are included to block heat radiation from inside the tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating)
Quartz block (Optional) is ideal for more cleanness and a higher achievable vacuum.

 

     
 Vacuum -Tight Flange
     
  • One pair of the vacuum-sealed flange is included for matched tube
  • The needle valve is installed on the right-side flange with a 1/4" tube fitting
  • The mechanical gauge and valve are installed in the left-side flange
  • Vacuum level: 10-4 torr by turbopump and 10-2 torr by a mechanical pump
  • A digital vacuum gauge (Pic. 1) and KF25 port are available upon request at extra cost

 

Pic. 1 Pic. 2

 
Heating Zone Length
  •  Four heating zones:    150+300+ 300+ 150 (mm), in total 900 mm length
  • Constant temperature zone:  300mm within +/- 2 oC (if 4 zones are set at the same temperature)
Temperature Control
  • Four temperature controllers are integrated into a touchscreen control panel to set temperature profiles easily, which can control each heating zone independently  or heating 4 zones at the same temperature
  • PID automatic control for heating rate, cooling rate, and dwell time up to 30 segments
  • Built-in overheating & broken thermocouple protection.
  • +/- 1 ºC temperature accuracy.
  • Four K-type thermocouples (one for each zone).
  • RS485 Communications Port  and soft are available for PC connection
Compliance
  • CE Certified
  • NRTL / CSA Certification is available upon request, additional charges will apply

 

×

Dimension:

  • Open Cover: 1700mm(L) x 700mm(W) x 900mm(H)
  • Close Cover: 1700mm(L) x 630mm(W) x 640mm(H)

Net Weight:

  • ~ 125 Kg

Shipping Weight:

  • 600 Lbs



MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: 

Related Products

Loading related products...