1200°C High Vacuum Compact Tube Furnace (8" heating zone) w/ Vacuum Fl

1 1

1200°C High Vacuum Compact Tube Furnace (8" heating zone) w/ Vacuum Flange & Compact Turbo Vacuum System - OTF-1200X-PV-HVS

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU:

Choose Your Variant or Type in Any Add-Ons:

Quantity:

Note

View full details

OTF-1200X-PV-HVS is an integrated system of a compact tube furnace with a high-performance Turbo vacuum pump to work Max. Temperature up to 1200˚C. The furnace is equipped with a 60mm O.D Quartz tube and vacuum sealing flanges as the heating chamber. A mechanical vacuum gauge is installed on the left flange, and right flange is connected to the Turbopump by a KF40 Clamp. This vacuum system enables the quartz tube to reach an ultimate vacuum level of 10^-5 torr. The furnace equips with PID programmable temperature controller to provide Maximum of 30 segments of heating and cooling segments with ±1 ˚C accuracy.

Double-layer steel structure and cooling fans to keep surface temperature <70°C
Alumina fibrous thermal insulation for better energy efficiency
Alumina coating on the thermal insulation for a longer service life of a heating chamber
Interchangeable design of heating module

SPECIFICATIONS:

Power	120VAC, 20 A, 50/60 Hz, single phase, or 208 - 240 VAC, 10 A, 50/60 Hz, single phase 1.2 KW
Working Temperature	≤1200°C (<1 hour) ≤1100°C ( continuous) ≤1000°C (under vacuum)
Heating Rate	≤20 °C/min
Heating Zone	8" (200mm), single zone
Uniform Temp zone	2.3" (60mm) (±2°C) @ 600 °C Temperature distribution
Temperature Controller	Proportional–integral–derivative control (PID control) and auto-tune function Built-in Over Temperature and Thermocouple Failure Protection 30 segments programmed with ramping, cooling, and dwelling steps DB9 PC communication port Temperature accuracy: +/- 1°C
Heating Elements	Fe-Cr-Al Alloy doped by Mo
Thermocouple	Type K, TCK8S3B
Tube Size	60mm Quartz Tubes: 60mm OD x 55mm ID x 600 L mm A pair of Quartz blocks with corresponding sizes is included to limit heat dissipation from the heating area Crucibles are also available for purchase
Vacuum Flanges	A complete 60mm O.D Flange set An O.D. 60mm flange is equipped with 1/4" tube fittings as gas inlet & outlet and Needle Valve, 1/4'' quick-connect for 1/4" O.D thermocouple feedthrough, and a Vacuum Gauge. The right flange is connected to the Turbomolecular pump and secured by a KF40 Clamp
Pressure	< 3 psig
Ultimate Vacuum of Quartz Tube	10-6 torr by the turbopump at ambient temperature.
Pressure Gauge	A Vacuum Guage is equipped on the flange set A Compact Turbo Vacuum Pump System with Guage, Valve - Made in Germany
Software (Optional)	*LabVIEW-based Temperature Control System (MTS01)* enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces.
Compliance	CE Certified NRTL or CSA certification is available upon request at an extra cost.
Application Notes	How to set up a ceramic tube and vacuum flange for MTI tube furnaces.

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
Any damage and rust resulting from improper storage or maintenance.
Any damages caused by the use of corrosive and acidic gases.
Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.

Manufacturer Part Number:

Item added to your cart

Item added to your cart