VBF-1200X-HV is a compact high vacuum furnace for samples up to 4" x 4" x 4". It comes with a one-end-open quartz chamber and Kanthal resistance heating wires for internal heating. The chamber is free of porous materials and high vacuum compatible. It can reach 10-6 torr via an optional turbopump.
SPECIFICATIONS
|
Power
|
- 208 - 240 VAC / 50/60Hz, Single-phase (a 20 A receptacle is required. )
- 3 kW max.
- Note Power cable included without a plug.
- An optional power plug is available upon request.
|
|
Working Temperature
|
-
≤ 1200 °C continuously
- Max. 1250 °C, < 30 min
-
Heating Rate: ≤ 20°C/ min
|
|
Heating Elements and Heating zone
|
- Ni-Cr-Al resistance coil on a sintered ceramic sleeve
- Multi-layer layers of Mo reflection plates for thermal uniformity.
|
|
Quartz Vacuum chamber
|
|
Ports
|
- KF50 or DN63 ISO flange for turbo pump
- KF25 port for electric feedthrough.
- 1/4" gas inlet and outlet with needle valves.
- KF25 port for a high vacuum pressure gauge.
|
| Temperature Controller
|
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- THE Default DB9 PC communication port is included for connecting to a PC
-
Eurotherm Temperature Controller is available at an extra cost with +/-0.1°C accuracy.
- Type K thermocouple
|
|
Vacuum Pressure
|
- Vacuum Level is dependent on the vacuum pump used,
- 10-2 torr via a mechanical pump
- 10-6 torr via turbo-pump
- Click the picture below to order a vacuum pump/gauge assembly.
|
|
Compliance
|
- CE Certified
- NRTL or CSA certification is available upon request at extra cost.
- Patten Number : ZL-2011-2-0102249.4 SINCE 2011-5-19
|
