Digital Controlled Syringe Pump with Heatable Glass Syringe -0 - 25ml/ – MTI Online Store

To Use Your Own Shipping, Fill The Note In Shopping Cart

Orders Placed After 2:00 PM PST Will Be Processed on the Next Business Day

To Use Your Own Shipping, Fill The Note In Shopping Cart

1 1

Digital Controlled Syringe Pump with Heatable Glass Syringe -0 - 25ml/min upto 100oC) - EQ-300SP-H-LD

Digital Controlled Syringe Pump with Heatable Glass Syringe -0 - 25ml/min upto 100oC) - EQ-300SP-H-LD

Minimum Order: $20 (equipment), $100 (crystals)

Low stock: 1 left

$2,297.70 USD

$2,297.70 USD

Sale Email for Lead Time

SKU: : \300SPH110

Voltage 110V 220V

Product variants

Quantity

View full details

SPECIFICATIONS:

Digital Controlled Infusion Syringe Pump	Features	Easy to use keypad interface Holds small or big syringes up to 60 mL Pumps continuously until you stop the pump The infusion rate can be changed while pumping Remembers previous settings on power-up Power failure mode allows the pump to continue pumping after a reset Syringe purge mode Displays total volume dispensed in mL or µL units The maximum pumping rate of 25 mL/min with a 60 mL syringe Precise reproducible flow rates Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min Infuses Only Does not withdraw, volume target, or have computer interface Infusion Syringe Pump with optional Heatable Glass Syringe is available at extra cost
	Input Power	100 -240VAC, 0.75Amps
	Dimension
100°C 20ml Heatable Glass Syringe with Temperature Control Unit	Max. Power	23 W
	Max. Temperature	100°C ( Higher temperature up to 250°C is available upon request )
	Thermo Couple	K type
	Temperature Controller	The controller uses PID via SSR power control Single point setting controller Over-temperature protection and alarm allow for operation without attendant(s). +/- 1 ºC temperature accuracy.
	Dimensions	260 x 230 x 120 mm (L x D x H)
	Syringe	20ml Glass syringe OD: 24mm ID: 20mm Total Length with a booster: 145mm
Operation instructions
Compliance	CE certified NRTL and CSA certification is available upon request at the extra cost
Application Notes	Pre-metered Horizontal-Dipping Process Such a syringe pump can precisely control the volume of the solution per unit coating area been fed into the gap between the cylindrical barrier and the glass substrate. Doctor-Blade (or Wire-Bar) Coating: Such Syringe Pump can be used for adding a solvent at various concentrations. By using multiple syringe pumps, you can add an ingredient in a certain weight ratio to a mixed solution. Similar to the Horizontal-dipping Process, the blended organic solution is introduced into the space between the barrier and the substrate by such pumps' capillary action. The Doctor-Blade is transported horizontally at a given constant velocity, a thin solution layer is then spread and formed evenly on the substrate. Dip Coating: Wet solution coating such as dip coating has been the most popular method for solution-processed devices. DIY an Ultrasonic Spray and Electrospinning device

Manufacturer Part Number:

.