Water Cooled Sealing Flange for 50mm dia. Processing Tube - FG-50WC

1 3

Water Cooled Sealing Flange for 50mm dia. Processing Tube - FG-50WC

Minimum Order: $20 (equipment), $100 (crystals)

Shipping and handling will be applied

Low stock: 2 left

$1,075.25 USD

Sale Email for Lead Time

SKU: : \FL50W

Product variants

Quantity

Add-Ons

Mullite Tube: 2" O.D (50.4 mm) x 55" L (1398 mm...

$2,297.70

Quartz Tube: 50 OD x 44 ID x 1200 L, mm (2"D x ...

$316.25

Quartz Block: 40 mm Diameter (one pair) for 50m...

$110.40

Alumina Foam Block: 40 mm Diameter (one pair) f...

$45.94

Adjustable Flange Support (320 - 510mm H) for K...

$112.70

View full details

This is a pair of sealing flanges with SS water-cooled tubing & valve for an OD 50 +/- 1.0 mm processing tube. If you can not use a ceramic block at both ends of the tube, you have to use the SS water-cooled tubing to keep the flanges cool (otherwise, the silicone O-ring may get damaged).

SPECIFICATIONS

Features	Made of Stainless Steel with double high-temperature silicone O-rings on the flange. Stainless steel needle valve with 1/4" pipe adaptor. 12mm push fitting for water pipes. The assembly kit will seal one end of a 50-52 mm diameter ceramic and quartz tube. A vacuum meter is installed on one side of the flange.
Vacuum level	10E-2 torr by a mechanical pump 10E-5 torr by a small turbo pump and 10-6 torr by a high-speed turbopump
Optional Accessories	Please click here to order a digital vacuum gauge for precision vacuum control up to 10^-4 torr For CVD application, please choose anti-corrosive vacuum gauge ( click pic below left 2 ) You can choose various end-of-fitting options ( click here to order separately ) You may click here to order a flow meter to control gas flow
Application Notes	MTI recirculating Water Cool System is the ideal tool for supplying cooling water to the flange set; please click the picture below for more detailed product information. Click the picture below on the right to order.
Warning	Must put a refractory tube block in front of the flange ( see picture below ) to avoid heat radiation melting the silicone O-ring. You may order a ceramic block in related products. Please do not over-tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs. For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies. Please contact us with any concerns. Flange support may be needed to carry the flange weight at extra cost. (Click pic to choose another flange size)