600°C Atmosphere Controlled Pyrolysis Box Furnace (150x50x60 cm, 450L)

1 1

600°C Atmosphere Controlled Pyrolysis Box Furnace (150x50x60 cm, 450L) - HTVO-600

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU:

Choose Your Variant or Type in Any Add-Ons:

Quantity:

Note

View full details

HTVO-600 is an atmosphere-controlled debinding chamber furnace with a chamber size of W 50 × D 150 × H 60 cm, 450L. Compared with the traditional box furnace design, the temperature uniformity is further improved with 5-side heating modules and special design of gas flow. It also comes with easy-to-install heating elements special designed for carbon based materials, including biochar, biomass, hard carbon, etc.

Features

Heating area W 50 × D 150 × H 60 cm, 450L
Three heating zones, five-side heating for best temperature uniformity
Stainless steel chamber for gas atmosphere and vacuum conditions
High purity sintered alumina and carbon based insulation for better inert environment even for carbon-based materials.

SPECIFICATIONS

Power	480 VAC, 50/60 Hz, 3 ph, 50 A, 40 kVA More working voltages are also available.
Furnace	Stainless steel 304 chamber for a gas tight chamber Dual case with cooling fans to keep the surface temperature less than 70 degrees C. Hanging design of the heating elements for easy replacement Optional quartz shielded heating elements to extended service lifetime in a harsh working environment.
Pressure	< 5 psig
Working Temperature	< 900 °C
Heating Area	Three-zone heating furnace Five side heating: front, back, sides, and bottom Each zone W × D × H 50 × 50 × 60 cm Total heating area W × D × H 50 × 150 × 60 cm
Uniform Heating Area	W × D × H 40 × 130 × 40 cm @ ±5°C @ 600°C
Thermocouple	K type
Heating Element	FeAlCr or SiC
Temperature Control	Programming PID temperature controller for each heating zone 30 segments temperature profile with ± 1ºC stability Built-in interlocks for overheating and thermocouple failure.
PC Communication and Software	Complementary PC software for temperature control, program editing, recipe storage, and data logging.
Vacuum (Optional)	KF40 port for vacuum generation Vacuum < 5e-2 torr after bakeout. Built-in mechanical vacuum gauge Recommended pumping speed of 800 L/min
Water Cooling	Water cooling is required for front and back doors and covers to protect o-rings from melting. MTI recommends getting a water chiller of KJ6200.
Certificate	CE Certification NRTL or CSA Certification is available upon request at extra cost.

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
Any damage and rust resulting from improper storage or maintenance.
Any damages caused by the use of corrosive and acidic gases.
Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.

Manufacturer Part Number:

Item added to your cart

Item added to your cart