• 99.9% Lithium

• 180.5 °C 

• 0.534 g/cm3

• Silver

• 0.75mm thick x 19mm wide, roughly 3 meters long 

• 22g/bag

• sealed in Al bag with filled Ar

• Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).

• The package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM. Never use N2 gases in the glovebox!!!
• Vacuum overpressure may blow the package during antichamber transfer. [only half range of vacuum for more times]
• No return or refund for misusing or wrong storage which causes The lithium foil oxidation

• MTI does not accept international orders due to restrictions on hazard material exportation!!!
• MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements.
• Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
• Lithium foil may be oxidized during handling and storage. if you find any oxidation on the surface of the Li-foil, please use a nylon brush/stainless steel scalpel to remove it before using it.
• If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene
• If you would like to thinner foil, please consider using the rolling machine by DIY

Bench-Top Fume Hood with Lamp & Blower with optional Carbon-filled Enclosures, 45"x 25" x 41", W x D x H-- FH36