Working Voltage

• 208 - 240 VAC, 50/60Hz, Single Phase
• 220V AC Power plug is not included (Please click here to order the plug)

Max. Power Consumption

• 1.2KW

Rollers (One pair)

• Dimensions: 230mm (Dia.) x 220 mm (W)
• Effective Rolling Width: 200 mm
• Material: HRC65-70, coating thickness ≥18mm,
  
• Rolling material with a hardness < HRC50
• Ra:≤0.4    

• 80 T

• 0-2 mm
• Tolerance: 0.001mm

• 550W AC motor with frequency speed controller
• Speed range: 0.3 - 5.0 m/min, adjustable by Touch Screen Control Panel

Press Planeness

• ≤2μm 

Compressed Air

• >60 PSI required (Air compressor is not included, you may order one in the related product)
• Attention: If a gas cylinder is used instead of an air compressor (pic2), a two-stage pressure regulator (pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator

      pic1         pic2

• Roll to roll assembling is available by clicking the picture below
• Sample testing is available upon the customer's request

Compliance

• CE certified
• NRTL or CSA certification is available upon request at an extra cost

Application Notes

• To avoid rusting, use acetone to clean and dry rollers' surfaces after each use
• Apply anti-rust lubricant on the surface of rollers if the machine is unused for a long period of time
• Never roll materials with hardness > HRC 50
• In order to prolong the lifespan of the roller bearings, regular lubrication is recommended
• Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared to the sheet's original thickness
• Clean roller surface for each rolling and applies lubricate when not in use to avoid corrosion