1 4

Dual Explosion-Proof Box for Battery Safety Test ( 20"x20"x20", 125L, UN38.3.4.7 & 8 ) - MSKTE903

Dual Explosion-Proof Box for Battery Safety Test ( 20"x20"x20", 125L, UN38.3.4.7 & 8 ) - MSKTE903

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details

The MSK-TE903 Dual Explosion-Proof Steel Box provides a safe enclosure for over-charging & forced discharging of all kinds of battery cell testings based on the UN38.3 standard (38.3.4.7 & 38.3.4.8). The two separate compartments with a total of 4 feedthrough ports allow for the testing of multiple batteries at the same time.

SPECIFICATIONS

Power Requirement
  • 100 - 240VAC ( 50/60Hz), 100W


Structure & Material
  • Materials:
    • Chamber: 1.5 mm thick brushed SS304 with tensile strength > 500 Mpa
    • Exterior: 3 mm thickness cold rolled steel with tensile strength > 400 Mpa
  • Structure: Two anti-explosion chambers, top and bottom
  • Chamber Size: 500mm x 500mm x 500mm (x2)
  • Testing Cables: Two 3-meter-long cables with clamps are included, Max. current rating is 30A 
  • Ports: Each chamber has two 2" diameter holes reserved for electric cables of battery testing equipment
  • Safety door: The pressure relief door is built on the back of each chamber. In the event of a battery explosion, the door will open and release pressure. 
Note: The max. capacity of Li-Ion batteries to be tested in the chamber should be limited to 4.2V@ 40Ah for single-cell or 160Wh for battery pack without protection circus

Venting Fan
  • A venting port with a high-quality exhaust fan is installed in the back chamber which shall be connected to your venting system. (ducting and exhaust system are not included )
  • Warning: Must keep a venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of a battery explosion.
  • Venting fan: 24 VDC, 3425 RPM, 235 CFM, 54.3 dBA
  • Centrifugal in-line exhaust fan with aluminum flex duct connection is recommended but not included.
  • If you need to control chamber temperature between 23oC - 46oC, we may help you to install a spot air conditioner ad the picture below, at the extra cost
 

Remote Control
  • A wireless hand-held remote controller can operate the machine within 10 10-meter distance for safe operation.

Lighting
  • Anti-explosion LED light (30W) is installed inside of each chamber. 
  • The angle of illumination is adjustable up to 90°

Electrode Holder & Cables
  • Two sets of battery electrode clamps with 10 AWG gauge cables (30A Max.) are included for easy & quick connections to batteries

Mobility 
  • Four mobile wheels are installed at the bottom for easy transportation
Battery Testers (Optional)
  • A smart battery analyzer for use as the source of over-charging and forced discharging is available here:
Application Notes

 

 

 

×

Dimensions Info:

  • Product Dimensions: 700mm x 630mm x 1800mm (L x W x H)
  • Net Weight: 220kg

Shipping Info:

  • Shipping Dimensions: 48" x 40" x 88"
  • Shipping Weight: 620 lbs

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: 

Related Products

Loading related products...