1 5

Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15

Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15

Minimum Order: $20 (equipment), $100 (crystals)

Low stock: 5 left

$5,747.70 USD
$5,747.70 USD
Sale Email for Lead Time

SKU:  YLJCIP15

View full details
YLJ-CIP-15 is the smallest cold isostatic pressing (CIP) in the world. It has a 22mm ID hydraulic chamber made by ultra-strength alloy, which can provide isostatic pressure up to 400 Mpa via a 15T hydraulic press. It is an excellent tool to prepare high-density compound pellets and a small-diameter rod. CIP-15 has a small footprint and can be placed in a glove box to prepare air-sensitive materials. A plastic protection cover is included. The machine also can be used as a pellet press.
Specifications:
Pressure Vessel
Max. Hydraulic Pressure in Chamber 300 MPa -- continuous holding
380 MPa --- less than 5 minute
Gauge Pressure Value to
Force Conversion


Optional digital meter with alarm
Gauge Displayed Pressure Value (Bar) for 87 mm Dia. Hydraulic Press 100 200 300 387
Optional Digital Gauge Displayed Pressure Value (Mpa) for 87 mm Dia. Hydraulic Press 10 20 30 38.7
Actual Force Applied on the Hydraulic Press (Ton) 3.8 7.6 11.5  14.7 
Pressure Applied to CIP Vessel ( Mpa) vs 22mm vessel cylinder 98 196 296 380
  • Notes: 
  • The actual force applied to the Vessel Cylinder (Ton) equal to the force applied to your working piece
  • Digital pressure Gauge ( 60Mpa ) with Alarm is available upon request ( Click picture to see specs & cost)
  • For calculating the actual pressure applied to your working piece, please follow the equation below:
    F=P_(Gauge Displayed Pressure Value (GDPV)) ×S_(Cross-section area of the inside piston)
    Since 1 Bar = 1.0197 kg/cm^2, Diameter of piston is 7cm
    Assume Gauge Displayed Pressure Value is 100
    F=101.97 ×π×(D/2)^2=3922.78 kg Force≈3.9 Ton force
    Therefore, From pressure gauge value to actual force is 26.31
    Assume Diameter of your Die is 4 cm, and Gauge Displayed Pressure Value is also 100 Bar
    Then, the actual pressure on your working piece is:
    P_(actual on working piece )= F/S_(Cross-section area of the working piece ) 
    P_(actual on working piece )= (3.9 Ton)/(12.56 cm^2 )=310 Bar
    In general:
    P_(actual on the working piece )=(P_( GDPV)/26.31) / (π*r_(Crosection area of the working piece)^2 )
Hydraulic Machine
  •  15T Max.
Botton Cylinder Traveling Distance 20mm maximum, the bottom cylinder (piston) in the cross-section illustration in the dimension sectionbelow
Operation Temperature 10 - 40°C
Compliance  CE Certified
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order ). Check this link to understand liquid rubber for sample preparation. ( Pic. 1)
  • Also, you may use a chamber vacuum sealer to seal the sample before CIP ( Pic. 2)
  • In order to get a high density of the sample, you shall press pre-pressing a pellet, then CIP ( Pic. 3)
  • Pic. 1 Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes,
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red or green buttons in this period.
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (20mm)
Packing List:
Name Qty
1 Main machine (15T Manual hydraulic pressing machine) 1 unit
2 Cold isostatic pressing dies (locating plate, top, and bottom pressing die) 1 set
3 Black Rubber Rings O.D 7/8" 3 pcs
4 Pushing Rod Handwheel 1 pc
5 Hydraulic pressing oil 1 bottle
6 Socket Head Screw Driver 1 pc

 

×

Dimension:

  • Working Spac: D1: 120mm D2: 70mm D3: 125mm H1: 250mm H2: 225mm
  • Overall: 200 L x 330 W x 550 H mm

Net Weight:

  • 70 Lbs

Shipping:

  • Shipping Dimension: 40"x 25"x30"
  • Shipping weight: 100 lbs

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: 

Related Products

Loading related products...