• Nominal: 10000mAh (3.8V cut-off, 1C )
• Minimum:  9800 mAh
• Energy density:  82.05 wh/kg

 Standard Charging current

• 50 Amp (Continuous discharge rate)
• 100 Amp ( < 30 sec Surge rate)   

• 38mm(1.5") x 120mm(4.7") Terminal: 6 mm Female screw in both ends for connection.
  • Height 120mm(4.7") is from end to end without 6mm male screw (blue color area) 
  • 

• 38mm(1.5") x 145mm(5.7")You may disconnect included 6mm screw as picture shown below.
  • Height 145mm(5.7") is included with  2 pcs 6mm male screw  
  • 

•  Charging:       0 - 45 ^oC (32 - 113 ^o F)
•  Discharging:  - 10 - 60 ^oC (14 - 140 ^o F)

• >2000 (80% of initial capacity at 0.2C rate, IEC standard) 
  • 2 times more than NiMH  and 10 time more than SLA

• Excellent cells to build a battery pack,Please click here to view battery pack made by LFP-38120P
• RC robots
• E-bike
• E-V
• It's a standard test battery for BST8-5V40A-RT

•  Please click here to download the specification
•  Please click here to download capacity test curve

• You may use our expandable battery holder module to DIY any battery pack at easy. Please click picture to learn how to DIY pack by module
• 

• Must choose a smart charger to recharger LiFP cell and pack. Click underlined below to order  Smart Fast Charger for LiFeP)4 battery pack

 Cautions

•  Li-Fe-POS4 battery must be cut-off at 3.8V/cell condition when charging
• You must limit discharging rate below Max rate
• Please see our damage test report to understand our specs and limit your application within specs
• Please read more info about LiFePO4 battery