SYJ-7720-S is a small EDM wire-cutting machine, specifically designed for laboratory use.
- High cutting precision
- Programmable cutting procedures, enabling the creation of intricate shapes
- Capable of cutting any conductive material, regardless of its hardness
SPECIFICATIONS:
| Working Table Size |
270×420mm |
| Stroke (X/Y) (L × W) |
250×200mm |
| Max. Z-Axis Stroke |
300mm |
| Control Panel |
Built-in via PC included |
| Cutting Roughness |
≤2.5 |
| Max. Cutting Speed |
100mm²/min |
| Optimum Roughness |
mm ≤2.5 (Medium speed ≤ 1.0) |
| Dia. of Molybdenum Wire |
mm0.1-0.3 (0.18 is recommended)
One roll of 0.18 mm Dia. moly wire is included
|
| Molybdenum Wire Moving Speed |
11.5 m/s |
| Dielectric Fluid |
One container of dielectric paste is included. Please dilute it per the instructions.
|
| Process Accuracy |
0.01-0.015 mm |
| Feeding Pulse Equivalent |
mm 0.001 |
| Power Supply |
- 208 - 240VAC, single phase, 50/60Hz
- Power consumption: <2.0 kw
AC110V version is available via a 3000W transformer
- AC110V version is available via a 3000W transformer
|
| Safety Note |
This EDM contains moving parts (sample stage and wire spooler) and live parts under high-frequency low voltage (wire holder) exposed to the outside during normal operation. MTI provides limited protection to ensure that the machine will work properly. However, the end-user must be responsible to perform the risk assessment and select suitable guards of the workplace to prevent any person or object from accessing the working area improperly. Here is an example of the safety guard.
|
