• High Purity Graphite Tube: 2.5"OD x 2" ID x 48" L (63.5ODx50IDx1168L, mm), EQ-TG-60D-46L
1 1

High Purity Graphite Tube: 2.5"OD x 2" ID x 48" L (63.5ODx50IDx1168L, mm), - TG-60D-46L

High Purity Graphite Tube: 2.5"OD x 2" ID x 48" L (63.5ODx50IDx1168L, mm), - TG-60D-46L

Low stock: 1 left

$895.00 USD
$895.00 USD
Sale Email for Lead Time

SKU: TG60D1168
View full details

Specifications:

  • O.D: 2.5 " +/- 0.05' (63.5mm)
  • I.D: 2.00'' +/- 0.05'' (50.8mm)
  • Length: 46" (1168mm)
  • Purity: > 99.999%
  • Manufacture Method: Extruded

Typical Properties

PROPERTY US VALUE METRIC VALUE
  Particle Size 0.008   in 0.02032   cm
  Density 0.060   lb/in 3 1.65   gr/cm 3
  Flexural Strength 3700   psi 25.5   mpa
  Compressive Strength 6000   psi 41.4   mpa
  Resistivity 3.2   ohm/inx10 -4    
  CTE 0.6   in/in °F x 10 -6 1.1   Microns/m °C
  Temperature (Air) 750   °F 399   °C
  Temperature (Inert) 5000   °F 2760   °C
  Ash Content less than 50   ppm    


Note: In order to reduce graphite oxidation in air,  you may make SiC coating on graphite surface using our SiC paste as the related product below
 
In order get longer tube service life, Please use quartz or alumia crucible to carry sample, instead loading sample directly inside tube,
please click picture below to choose one crucible boat:
Ceramic Crucibles ( Alumina, Quartz and Zirconia etc )
Inspect your delivery:
Please check package for damages before accepting delivery.
Should damages found, please keep all packaging materials, take pictures, and report immediately to carrier/MTI.

No Warranty:
Kindly note this item is a consumable part, and not covered by warranty. Make sure to inspect for defect(s) thoroughly before use. 
×

Manufacturer Part Number: