LiNiCoMnO2 (Lithium Nickel Manganese Cobalt Oxide) powder for Ultra-high capacity cylinder Li-ion power battery cathode 200g/bottle (Ni:Co:Mn=1:1:1, NCM111)

Specification XRD	Item	Description	Testing Method
	D10 (μm)	≥3.0	Laser Particle Size Analyzer
	D50 (μm)	5.07.5
	D90 (μm)	≤15.0
	Appearance	Dark brown powder, atmospheric stability
	Elements Proportions	Ni:Co:Mn = 1:1:1
	Ni+Co+Mn (%)	60.0±2.0	Volumetry
	Li (%)	7.3±0.3	Atomic Absorption Spectroscopy Inductively Coupled Plasma
	Na (ppm)	≤300
	K (ppm)	≤100
	Ca(ppm)	≤200
	Fe (ppm)	≤100
	Mg (ppm)	≤200
	Cu (ppm)	≤10
	Specific Surface Area (m2/g)	0.20-0.40	Surface Area and Porosity
	pH value	10.8011.40	PH Tester
	Humidity	≤0.05 %	Coulometric KF Titrator
	Tap Density (g/cm3)	≥2.10	Tap Density Tester
	Compaction Density (g/cm3)	≥3.30
	First Discharge Capacity (mAh/g)	≥152.0	0.2C, 4.2-2.7V, Vs Li, Half Cell
	First Discharge Efficiency (%)	≥86.0
SDS

Note:

MTI does not manufacture this product, and only sell the small quantity to research for development for new generation battery. If you need a larger quantity or have a question for IP, we will forward your inquiry to the producer.

Application Notes:

1. Please click to see Procedure for Preparing Anode & Cathode Electrode Slurry
2. Please keep the powder in the vacuum box to avoid moisture.
3. Please bake the powder in a vacuum oven at 120 - 150 °C before making slurry and coating to ensure max. capacity.
4. This product is not manufactured by MTI. We only sell small quantities to help the researcher developing a new battery. If you have any questions about IP conflict, let us know. We will forward the question to the manufacturer.