GSL-1700X-MGI-4 is a compact four channels 25mm O.D. tube furnace for high throughput heat treatment research of alloy and ceramic material up to 1700°C. It is an excellent tool to research the phase diagram in MGI's new generation material.
SPECIFICATIONS:
Furnace Structure
|
- The furnace is consistent with 4 small tube furnace modules with alumina tube 25 OD x 22 ID x 460 L, mm
- Each heating module's temperature is controlled independently up to 1700°C
- Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas
- Processing 4 samples with the different temperatures at compact space
|
| Heating Element |
|
|
Working Temperature &
Constant Temperature Zone
|
- Continuous Working Temperature 1600°C
- Maximum Working Temperature 1700°C (< 1 hrs)
- Constant temperature zone:
- +/- 1°C within center 30 mm cubic zone
- +/- 5°C within center 60 mm cubic zone
|
Processing Tube
|
- High purity alumina tube with Φ25X L 460 mm, 4 tubes included
- 4 flowmeters are included
- The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves
- Max. Vacuum 10-5 torr by turbopump
- Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
|
| Temperature Control |
- Touch screen precision temperature controller with the protection of over-temperature and Thermal couple broke.
- 4 channel heating tube is controlled independently by 30 segments programmable temperature controller
- 4 B type Thermal Couple
- PC control software is included, which can control 4 channel heaters by one Laptop
|
|
Heating Rate
|
|
|
Temperature Accuracy
|
|
|
Power & Working Voltage
|
- 6 KW, 208 - 240V single phase, 50/60Hz ( if 4 heating modules operation in the same time )
- Three-phase, AC 380V - 460V available upon request.
- Note Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
|
|
Laptop, software & WiFi Control(Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
-
Labview Based Temperature Control System (MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000).n.
|
| Compliance |
- CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
|
Warning &
Application note
|
|
