• Resistance-heated pellet pressing and sintering furnace
• Designed for ceramic and metallic material processing
• Supports pressing and sintering under an oxygen atmosphere
• Suitable for studying oxygen pressure effects on functional oxide ceramics
• Specified pellet diameter range: 10–12.7 mm
• Maximum pressing pressure stated in the product overview: 100 MPa
• Maximum working temperature stated in the product overview: 1350°C
• Precision servo-driven pressing mechanism
• Programmable temperature and pressure control
• Vacuum and positive-pressure chamber operation
• Touchscreen control and PC monitoring software
• Recirculating water chiller included

• Power supply: 208–240V AC
• Phase: Single phase
• Frequency: 50/60 Hz
• Rated power: 5 kW

• Precision servo motor-driven pressing mechanism
• Maximum applied load: 2000 kgf
• PID pressure control for maintaining a constant pressing load
• Specified load control accuracy: ±0.5 kg
• Maximum pressing pressure stated in the product overview: 100 MPa
• Designed for controlled pellet pressing during high-temperature processing

Note: The 2000 kgf specification describes applied force, while 100 MPa describes pressure. Actual pressing pressure depends on the effective pressing area.

• One silicon nitride (Si₃N₄) pressing die included
• Included die inner diameter: 12 mm
• Pellet diameter range stated in the product overview: 10–12.7 mm
• Designed for ceramic and metallic pellet pressing and sintering

View Si₃N₄ pressing die specifications.

Note: The standard included die has a 12 mm inner diameter. Dies for other pellet diameters are not specified as included.

• Chamber material: Stainless steel
• Internal chamber diameter: 315 mm
• Internal chamber height: 315 mm
• Internal chamber dimensions: Ø315 × 315 mm (H)
• One quartz observation window
• Observation window diameter: 120 mm
• One KF25 vacuum port located at the rear of the chamber
• One KF40 vacuum port located at the rear of the chamber
• Maximum specified vacuum level: 10^-5 Torr
• Maximum positive chamber pressure: 3 bar
• Vacuum pump available separately upon request

• Designed for pressing and sintering under an oxygen atmosphere
• Suitable for research on oxygen pressure effects in functional oxide ceramic materials
• Supports vacuum chamber operation
• Maximum specified positive chamber pressure: 3 bar
• Maximum specified vacuum level: 10^-5 Torr
• Touchscreen interface supports chamber pressure monitoring and control

• Resistance heating system
• Heating element described in the supplied specifications as a Mo₂Si coil
• Maximum heating element working temperature stated under oxygen: 1500°C

Note: The 1500°C heater rating is distinct from the furnace working temperature. The heating element designation is retained as supplied by the manufacturer.

• Maximum furnace working temperature stated in the product overview: 1350°C
• Maximum working temperature stated in the detailed temperature-control specifications: 1400°C
• Maximum heating element working temperature under oxygen: 1500°C
• Heating rate stated in the product overview: Up to 20°C/min
• Maximum heating rate stated in the detailed specifications: 100°C/min
• Temperature control accuracy: ±2°C

Specification clarification: The supplied product information lists different maximum furnace temperatures (1350°C and 1400°C) and heating rates (20°C/min and 100°C/min). Both values are preserved here. Confirm the applicable operating limits with the manufacturer before use.

• SCR temperature controller
• Type B thermocouple
• 30 programmable temperature segments
• Specified temperature control accuracy: ±2°C
• Programmable temperature profiles for heating and sintering processes
• Integrated touchscreen control panel
• RS-485 communication port
• PC control and data recording software included

• Integrated touchscreen control interface
• Temperature monitoring and control
• Vacuum level monitoring and control
• Chamber pressure monitoring and control
• Supports operation of the furnace's controlled heating and pressing processes

• RS-485 communication interface
• PC operation software included
• Supports recording temperature profiles
• Supports recording pressure profiles
• Designed for process monitoring and data collection during pellet pressing and sintering

• KJ5300 Digital Temperature-Controlled Recirculating Water Chiller included
• Water flow rate: 16 L/min
• Cooling capacity: 6,000 BTU/hr
• Provides recirculating cooling water for the furnace system

View KJ5300 recirculating water chiller.

• Vacuum pump available upon request
• Vacuum chamber includes KF25 and KF40 connection ports.
• Maximum specified vacuum level: 10^-5 Torr
• Vacuum pump is not explicitly listed as included in the standard package.

View vacuum pump options.

• CE certified
• NRTL certification available upon request at additional cost
• CSA certification available upon request at additional cost

• The product overview specifies a maximum furnace temperature of 1350°C, while the detailed temperature-control section specifies 1400°C.
• The product overview specifies heating rates up to 20°C/min, while the detailed temperature-control section specifies a maximum of 100°C/min.
• The heater's stated 1500°C temperature rating should not be interpreted as the maximum permitted furnace operating temperature.
• The specified maximum pressing pressure of 100 MPa depends on the pressing area and must be considered alongside the maximum servo load of 2000 kgf.
• The standard included Si₃N₄ die has a 12 mm inner diameter, although the product overview describes pellet diameters from 10 to 12.7 mm.
• Confirm the appropriate temperature, heating rate, pressing pressure, and atmosphere limits for the intended application with the manufacturer.