1 2

Hot Rolling Laminating Press up to 130C with Max.1200 kgf & Optional 340 / 480 / 1050 mm Width - JTFM380

Hot Rolling Laminating Press up to 130C with Max.1200 kgf & Optional 340 / 480 / 1050 mm Width - JTFM380

Minimum Order: $20 (equipment), $100 (crystals)

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details

JTFM380 DC6 is a 130°C max. double-sided laminating machine, which can apply pressure by the built-in manual hydraulic pump up to 1200 Kg force with optional widths, of 340mm, 480 mm, and 1000 mm. It is an excellent tool for research on multilayer LCP, flexible electronic devices, and solid-state Li-Ion batteries.

SPECIFICATIONS:
Model  JTFM380  JTFM520  JTFM 1050
 Laminating Width  340mm Max  480mm Max  1000 mm Max
 Laminating Width 3 mm Max
Roller diameter  Φ192×380mm  Φ192×520mm  Φ216×1050mm
  • The top roller is made of A3 Steel and the bottom roller is made of high-temperature rubber
  • Only the top steel roller is heated
  • Both rollers made of SS304 are available upon request
Laminating Speed   0.5-30m/min 0.5-30m/min  0.5-30 m/ min
 Winding motor  DC motor with tension-controlled
Laminating Temperature Range  60-130°C 60-130°C 60-130°C
Max. Pressure 
  • Pressure is applied by a manual hydraulic pump up to 1200 Kg with a pressure gauge
  • Pressure gauge vs. the force applied to the roller as below 
  • Gauge Pressure (MPa 2 4 6 8 10 
    Force applied to the rollers (Kg) 240 360 720 960 1200
  • Optional: You may use an electric oil pump to achieve automatic pressure setting up to 15 MPa as the link below
 Power 220VAC +/- 10% , Single phase, 50/60Hz,
5kW		 220VAC +/- 10% , Single phase, 50/60Hz,
7kW		 220VAC +/- 10%, Three phases, (single phase is available with a boost frequency converter), 50/60Hz,
7 kW
Compliance
  • NRTL or CSA certification is available upon request at the extra cost

 

×

Dimension:

  •  JTFM380: 1680 L x 1000D x 1300 H, mm
  • JTFM520: 980L x 1350D x 1250H, mm
  • JTFM 1050: ~2000 L×1600 D ×1500 H, mm

Weight:

  • JTFM380: 380kg
  • JTFM520: 450kg
  • JTFM 1050: 700 Kg

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as Graphite dies, O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: