EQ-SPC-3850 is a large precision screen printing machine driven by compressed gas with a coating area of 300 mm x 500 mm. It is a cost-effective tool for making various film coating with patterns and can be used for making flexible rechargeable battery electrodes, OLED, or thermoelectric devices.
Specifications:
Features
|
- Two types of operation modes: foot pedal and automatic
- Digital display to count printing number
- Vacuum chuck for holding the printing sheet faster and easier
- The printing knife is driven by compressed gas with constant pressure to ensure repeatable quality printing
- Printing length, width, and blade angle are adjustable for quality printing
|
| Working Voltage |
- 208 - 240V Single Phase, 50/60Hz
- 1000W power consumption
- For 110V, a 1500W Transformer can be purchased separately
|
Substrate Holder
|
- A substrate is held by the vacuum chuck with an area of 1000 x 1800 mm
- The vacuum pump is built into the bottom of the machine
- Effective printing area: 960 x 1725 mm Max. ( 38"W x 50"L)
- Substrate thickness: 0 - 80 mm adjustable
- The position of the vacuum chuck can be fine-adjusted with the knobs.
- Position adjusting range:
- X-axis: 10mm to the left and 10mm to the right, a total of 20mm
- Y-axis: 8mm to the front and 8mm to the back, a total of 16mm
|
Screen Mask
|
- A sample screen mask with MTI's Logo is included for testing and machine inspection.
- Extra screen masks with frames are available from Amazon or many other online stores.
- A screen mask with a customized printing pattern can be DIY, please refer to this video.
- MTI can also provide screen masks with customized printing patterns and sizes, please contact us for more details.
|
Coating Blade
|
- Two Squeegees are also included for immediate use.
- The backing blade is used for returning the printing material to achieve automatic continuous printing.
|
| Position Accuracy |
|
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request at an extra cost.
|
|
Compressed Gas Requirement
pic1
pic2
|
- The compressed air pump is required for the operation
- 0.5-0.6 MPa pressure required
- The compressed Air pump is not included, please click the link below to order one if you don't have
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator.
|
