Furnace structure
|
- Double-layer steel casing with air cooling. The surface temperature of the case is < 70°C.
- Refractory fibrous alumina insulation liner for maximum energy saving.
- Heating element: NiCrAl Resistance Wire
- Two fibrous ceramic tube blocks are included for blocking heat radiation from the inside tube.
- Hinged-type flange with water cold for sample loading at ease
- This furnace can be used as an annealing or diffusion furnace for 8" wafers ( 11"tube) or 12" wafers (15" tube)
- The electrical lid actuator provides easy & hassle-free lid opening
 |
 |
 |
 |
Structure schematic
|
11" or 15" ceramic blocks
|
Holding a 12" wafer |
Electrical Lid Actuator |
|
Heating zone
|
- Two zones: 450 mm + 450 mm ( 900 mm in total)
- Constant temperature zone length: 500 mm (if three zones are in the same temperature within +/- 5°C)
- Cross-section Temperature tolerance +/- 5°C
|
Working temperature
|
- Max heating temperature: 1200°C
- Max heating & cooling rate: 10°C/min
- SiC heating elements, a total of 36 pcs
|
Temperature control
 |
|
Eurotherm Controllers (optional)
|
- Temperature Accuracy: ± 0.1ºC
- 1 heating zone per controller
- 1 program of 8 or 24 segment
- Alarm Relay: Form 'A' and Form ‘C’ built-in
- Digital Communications: RS485 with software
|
Laptop & software (Optional)
 
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
- Labview Based Temperature Control System (EQ-MTS01) is available to enable the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
|
Fused quartz tube
|
- 11" OD or 15" O.D quartz tube with 71" Length is selectable from product option
- High purity quartz tube, please click the bottom left picture to view.
- Warning: quartz tube is fragile, please handle it with care. The warranty does not cover the broken tube by use
|
Vacuum sealing & Flange
|
A pair of stainless steel vacuum sealing flanges (Hinged Type) and 4 pieces of high temp-resistance silicon O-ring are included in order to achieve the vacuum rate of 10^-2 torr via a heavy-duty mechanical pump. Left Side Flange: stainless steel needle valves, and 1/4" barbed hose fitting. - One 1/4" OD thermal couple insert port is built on the right flange for easy temperature calibration.
|
|
Options
|
-
The tube furnace should be calibrated regularly to maintain temperature accuracy and uniformity. We are providing a simple calibration kit for you to complete this job at an extra cost. The complete calibration kit includes
- You may consider ordering turbopump for hi-vacuum up to 10-5 torr ( click pic below right to order )
- 4'' ~ 8'' large size quartz boats
- We can make the furnace into a verticle upon request.
|
Rated Voltage
|
- Three Phase, 208V AC, 50/60 Hz 3 phase 380V is optional
- AWG 8# Power cord is included (without plug)
|
Power consumption
|
Max. 20KW (100A breaker required)
|
Product Dimension
|
2000 L x 765W x 1130 H, mm
|
Net weight
|
300kg
|
Shipping dimension
|
85" x 40" x 70" |
Shipping weight
|
1200 lbs
|
Warranty
|
- One-year limited warranty on electrical parts. ( Consumable parts such as processing tubes, o-rings, and quartz tubes are not covered by the warranty)
- You may order a replacement quartz tube at the link below
|
Compliance
|
- CE Certified
- NRTL or NRTLCSA Certification is available upon request at the extra cost
|
| Operation Instructions |
 |
Warning
 |
- Tube furnaces with quartz tubes are designed for use under vacuum and low pressure < 0.2 bar
- Attention: A two-stage pressure regulator must be installed on a gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.
- Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C
- The flow rate for gases should be limited to<200 SCCM (or 200ml/min) for reducing thermal shocks to the tube
|
