RHF-1500S is a bench-top atmosphere-controlled rapid heating furnace ( ACRHF) with a max working temperature of 1500oC. The small furnace is designed for simulating a big kiln to find suitable sintering processing, and it is excellent to make single crystal cathode powders for battery materials.
.
SPECIFICATIONS
Furnace Features
|
- Two heating zones with ceramic rollers in the middle to produce rapid heating
- Heating elements are made of SiC rods with max. 1500oC working temperature
- The heating module is placed inside a vacuum chamber for atmosphere control from oxygen to inert gases.
- 400 mm long heating zone with 200mm constant temperature zone within +/- 2ºC
- Dual programmable temperature controllers provide +/-1ºC accuracy
- Two flowmeters are installed for gas flow control
|
| Power |
- AC 208-240V, single-phase, 50/60 Hz
- 12 KW max ( 30A breaker and plug required )
-
10-foot power cable included but without plug
|
Heating chamber
 
|
- SiC rod as heating elements
- Heating Zone: Two heating zones with a total dimension of L400 x W150 x H89 mm ( 53L capacity)
- Constant temperature zone: 200 mm with +/- 3ºC
- Almina ceramic rods are middle of the heating chamber to hold the multi-crucibles
- Fiberus alumina is used as thermal insulation
- Max. working temperature: 1500°C max (< 60 minutes ) and 1400°C (continuous )
- Max heating rate: 50 ºC/s
|
| Vacuum chamber |
- The heating module is placed into a stainless steel vacuum chamber with
- KF 25 vacuum port
- Dail vacuum gauge
- Gas inlet and outlet port ( 1/4)
- Two hinged types doors for loading and unloading samples
|
|
Temperature Control
 
|
- Two temperature controllers for controlling two zones independently via SCR
- PID automatic control with up to 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Over-temperature protection and alarm allow for operation without attendant(s).
- Two S-type thermal couples are included
- ± 1 ºC temperature accuracy for dwelling.
- RS485 Communications Port.
- PC Control:
-
An MTS-02 control module is included for PC control on this furnace.
- We recommend ordering a computer (laptop) from us to avoid software installation problems as we will perform installation and testing before shipping. For more information please click here
|
|
Vacuum Level and
Gas compatible
 
|
- Limited by the vacuum pump
- 10^-2 torr can be achieved by the mechanical pump
- 10^-4 torr can be reached by molecular pump
- The pump is not included. (Please click the picture left to order )
-
The furnace is comparable to oxygen and inert gases ( not for flammable gas )
- For use with H2 gas, you must get a permit from MTI, and the furnace must be modified
|
|
Crucibles (optional)
|
- Two Alumina Boats / Saggar (400ml) can fit into the furnace and sinter 1 kg NMC Click Pic 1 to order)
- 8 round crucibles ( 50 mm Dia ) can fit into the furnace for multi-composition materials.Click Pic. 2 to order )
-
 Pic. 1  Pic. 2
|
|
Dimensions
|
 
Net Weight
|
|
|
Shipping Weight & Dimensions
|
|
|
Warranty
|
- One-year limited manufacturer's warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order replacements for related products below).
|
|
Compliance
|
- CE Certified
- NRTL(UL61010) or CSA certification is available upon request at extra cost.
|
|
Reference Video
|
 |
|
Operation Instructions
|
|
Gallium">Ga5O12
- Growth Method: CZ
- Lattice constant: 12.376 Å ± 0.01 Å
- Orientation: <111>
- Dimension: 3"dia x0.5mm,2sp
