• Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. 

• High-purity fibrous alumina insulation for Max. energy saving.

• A hydrogen detector and solenoid valve are included for safe operation

• The hydrogen gas furnace must be placed under a fume hood which is not included. Please click to view the spec of MTI EQ-FH-36 fume hood.

• 2.5  KW  Max. ( 20A breaker required)

• AC 208-240 Single Phase, 50/60 Hz

• 1400 °C  continuous operation
• 1500 °C (< 1 hour )

•  ≤ 10 °C/min

• Material: High purity Alumina Tube  

• Tube Size:  50 O.D x 38 I.D. x 700  Length. (mm )

• Two fibrous ceramic tube blocks are included for blocking heat radiation from the inside tube.
  (Ceramic blocks must be fully inserted into the furnace chamber before heating)
       

Heating Zone and

Temperature Uniformity

• 6" ( 152 mm) 

• 60 mm (± 2 °C) heating area with best temperature uniformity.

• PID automatic control via SCR (Silicon Controlled Rectifier) power control.

• Self-tuning and built-in protection from the overheated and broken thermocouple. Please click here to learn why SCR is more accurate than SSR (Solid State Relay)

• MET certified 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.

• Over-temperature protection and alarm allow for operation without attendant(s).

• +/- 1 ºC temperature control during the dwelling.

• RS485 Communications Port.

• Computer-access Temperature Control (Optional)

• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit. 
  

• You may upgrade the temperature controller to the Eurotherm 3004 Temperature Controller which is compatible with LabVIEW. This package includes a Eurotherm 3004 programmer, and a communication cable (RS485 - USB). (Optional - LabVIEW program and OPC service are not included)

• +/ - 1°C during the dwelling.

• One pair of stainless steel vacuum flange is pre-connected for the two ends of the tube, which allows high vacuum up to 10E-5 torr and 5 PSI positive pressure.
  
• Two solenoid valves are installed on the left of the flange for the Hydrogen gas and N2 gas inlet.  It connects with a hydrogen detector.  Once hydrogen gas leak is detected (20% lower explosive limit (LEL)),H2  gas inlet valve will be closed and N2 gas valve will be opened,  and heating elements will be shut down immediately
• One pressure gauge and a needle valve is installed to control the Hydrogen gas pressure, which must be less than 0.03 MPa.

Left flange side	Right flange side

• One Honeywell UL Approved Sensepoint Gas Detector is Integrated into the system.

• Working Temperature Range:   40ºF to +149ºF (-40ºC to +65ºC)

• Alarm Point:                            H2 Limited Explosive Line 20% (20% LEL).  Once detecting H2 gas beyond the point, it will shut off the inlet valve to the H2 and heating elements automatically.

• One 0 -1000 ml/min floating meter is installed on the gas-outlet end for adjusting the gas flow rate.
• 1/4" Dia stainless steel tube is installed for burning hydrogen gas during gas flowing.
• One long lighter is included in the standard package for igniting hydrogen gas manually.
• The solenoid valve automatically shuts down the gas inlet and heating elements in case of system failure.
•           
  

• 1500 °C SiC Electric Heating Elements,  4 pcs. ( click the picture below for detailed specs )
  

• Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
• Labview-Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
• A wireless remote control provides up to 300 meters operating range.
• The above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
• Note: The software is only compatible with MTI’s Yudian Temperature Controller

•