• The refractory muffle is built-in with a water-cooling wall with dimension 470 LX 410W X 550H (mm), which can stand at positive pressure up to 0.06Mpa and vacuum up to - 0.09Mpa.
• Built-in pressure gauge, vacuum valves, and one gas float meters
• MoSi2 heating elements for working in both inert gas and oxygen environment up to 1600oC
• Two digital temperature controllers for controlling and monitoring furnace running at safety

• Heated chamber: 400x 400x 400 mm ( 16x16x16 inch), 65 Liter ( Max. )
• Energy-saving 1800-grade fibrous alumina insulation
• Sealed by stainless steel with water cooling
• Two sides heating ( Left and right ) to ensure the best temperature uniformity.
• SiC plate is installed on the bottom, which has 100kg, Max. loading

Power

• AC 208 - 240V, three phases (50/60 Hz). 400 or 480VAC is also available upon request. 
• 36 KW
• 80 Amp (100 Amp air breaker is required)
• 9' Power cable is included without a plug.  Suggest you install the power plug according to your lab power panel by a local electrician.

Working Temperature & Heating Rate

• Continuous:             800°C - 1600°C
• Max.                         1650°C (< 2 hr)    
• Heating Rate:           10°C / min max.
• Temp. Accuracy:       +/- 1°C

Heating Elements
  

• 12 sets of MoSi2 coils heating elements are built-in both sides of the chamber and replaceable 
• The heating element is consumable parts that should be ordered separately if an extra set of heating elements is required. 
  
• MoSi2 heating elements can be heated both in inert gas and air

Temperature Controllers

    

• Two temperature controllers and thermocouples (T/C)  are built-in the furnace
• The primary controller and thermocouple dominate the user-defined heating program and the main alarm system with +/- 1oC accuracy and 30 segments of programable
• The monitoring controller only monitors the real temperature by the other thermocouple and activates the secondary alarm system when the failure of primary controller to ensure safety.

• Gas Flow Control and Vacuum Valve one large flowmeter (12L/min) is installed in the front panel o
• KF40 vacuum port with the valve is built-in to connect a vacuum pump
• The Heavy-duty vacuum pump is included. Please click the Pic. left to see specs

Overall Dimensions

• 914 L X 914W X 1897 mm 

Shipping Weight

• 750 kg

Warranty

• One-year limited warranty with lifetime support.  (Consumables including heating elements and O-rings are not covered by the warranty, please order the replacement at related products below.)

Compliance

• CE Certified
• NRTL or CSA certification is available upon request at the extra cost.