Furnace Structure
|
- Double shell steel case with a cooling fan to keep outside case at a lower temperature
- High purity alumina fiber insulation for max. energy saving
- High purity alumina (1765°C) coating inside the chamber for longer service life
- Universal digital power controller which can be used 50 - 60 Hz worldwide
|
Primary and Monitoring Controllers
|
- The primary controller and thermocouple dominate the user-defined heating program and main alarm system.
- The monitoring controller only monitors the real temperature by the other thermocouple and activates the secondary alarm system when the failure of the primary controller to ensure safety.
|
Temperature Controller
|
- 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
- Over-temperature protection and alarm allow the operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- PC control ready. Cable and software are included.
|
Temperature controller (optional)
|
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which provides +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic left to view the full spec of the Eurotherm temperature controller. (Pic. 1)
- Touch screen control panel version is available upon request, which can pre-store 5 programma (Pic. 2)
 Pic. 1  Pic. 2 ( KSL-1700X-
|
Laptop, software & WiFi Control(Optional)
 
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
-
Labview Based Temperature Control System (EQ-MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
|
Gas Inlet & Flow Meter
|
- The gas inlet is 1/4 O.D tube fitting installed in the left panel of the furnace
- The gas outlet is installed in the top of the furnace.
- A 160 scm float meter is built in the front panel with an adjusting knob. (Click the pic in the left column)
|
| Voltage & Power |
- AC 208V-240V single phase, 50/60 Hz (a 65A power line is recommended.)
- Max. current: 50A
- Max. power: 10KW
- The power cable is included, but without a plug
|
| Heating Elements |
Super 1800 grade MoSi2 (30 x 500mm) |
| Working Temperature |
- 1600°C or 2912° F (continuous)
- 1700°C or 3092° F (< 1 hour)
|
| Heating Rate (recommended for heating procedure) |
-
2.5°C /min from RT- 200°C (Cold Start)
-
<5°C / min from 200-800°C
-
5°C / min from 800-1600° C
|
| Temperature Uniformity |
- +/- 5°C @ 1200°C in the center 150 x 200 x 250mm area
|
| Weight |
|
| Dimensions |
- Chamber: 300 L x 300 D x 400 H mm (12 L x 12 D x 16 H inch) 36 Liter
- Overall: 650 L x750 W x1500 H mm ( 26"x 30" x 59" )
|
| Shipping Weight & Dimensions |
|
| Warranty |
- One-year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
| Certifications |
-
CE Certified.
-
NRTL or CSA certificate is available. at extra cost. )
|
| Application Notes |
- The cooling rate shall also not exceed 10 °C /min.
- Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
- A refractory door block must be inserted before the closing door.
|
|
Operation Instructions
|
 |
