PTL-SC-4S-LD features an air-tight chamber with a front observation window. The unit provides inlet and outlet valves for inert gas purging. This helps to protect samples from moisture or oxygen exposure at the end of the coating process. It provides four separate platforms to place coating solutions each with magnetic stirrer. User can also control the speed of the magnetic stirrer for each beaker independently by using the knobs on the front panel of the controller.

In this technique, the thin film is deposited on glass substrate following a chemical technique called successive ion layer adsorption and reaction (SILAR). The technique involves multiple dipping of the substrate in a given solution and deionized water, the temperature of both can vary from case to case.

Power Input	208-240VAC, 50/ 60Hz
Air Tight Chamber	Provision of inlet and outlet valves for gas purging Chamber size: 640L x 475W x 575H mm
Actuator	Stepper motor
Drive Mechanism	Lead screw
Dip Duration	0 - 99 seconds / minutes / hours
Speed Control	Drawing speed adjustable from a digital panel from 2 microns/sec  to 9000 micron/sec ( Max.)
Number of Dips	1 - 999
Stirrer Speed	0 - 999 rpm Independent speed control over 4 working positions
Stroke length Max.	100 mm
Control Unit	Speed and mode control via LED display
Warranty	One year limited with lifetime support
Dimension Drawing
Net Weight	130kg
Shipping Weight & Dimension	300 lbs,    40"Lx40"Wx40"H
Compliance	TUV(UL61010)  or CSA certification is available at extra cost. please click marks below to learn details )
Operation Instructions
Application note	In order to get better film coating, the substrate shall be treated by plasma cleaner (Please click on the first picture below for more information) Use ultrasonic processor to disperse nanopowder or homogenize solution to get better coating (Please click on the second picture below for more information) Click here to visit our Knowledge Center and learn about dip coating.