4" Vacuum chuck for MTI CNC Dicing Saw - EQ-ECO402
4" Vacuum chuck for MTI CNC Dicing Saw - EQ-ECO402
Low stock: 10 left
Regular price
$350.00 USD
Regular price
Sale price
$350.00 USD
Unit price
per
SKU: : \ECO402
Couldn't load pickup availability
This is a replacement vacuum chunk for the MTI EQ-ECO-402 dicing saw
For mounting wafers easily and quickly, you may also choose a vacuum chuck (P/N ECO402) with 20-micron flatness.
Put your sample (usually a thin wafer) on the removable adhesive film (ECO 419) (available from MTI upon your request), then place the film with the wafer on the top of the vacuum chuck.
Open the vacuum valve, vacuum chuck will suck the wafer firmly and be ready for cutting.
There is a M6 screw thread underneath for mounting the vacuum chuck.
For mounting wafers easily and quickly, you may also choose a vacuum chuck (P/N ECO402) with 20-micron flatness.
Put your sample (usually a thin wafer) on the removable adhesive film (ECO 419) (available from MTI upon your request), then place the film with the wafer on the top of the vacuum chuck.
Open the vacuum valve, vacuum chuck will suck the wafer firmly and be ready for cutting.
There is a M6 screw thread underneath for mounting the vacuum chuck.
A Push-to-connect fitting 6mm is installed in the chuck. If you are using your own pump, you also need to install the 6mm push-connect fitting in the vacuum pump. Please make sure the thread type is right for your pump.
Click to order 6mm polyurethane tubing.
×
Manufacturer Part Number: