Structure
 
|
- Five sides heating ( left, right, front, back, and bottom ) to achieve a more uniform temperature zone.
- One SiC sheet is placed on the bottom of the chamber ( top of the heating element ) to support heavy sample load up to 100 kg.
- Double temperature controller to ensure furnace never overshoots
- Thermal-efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency.
- Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch.
- Built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace.
|
Chamber Dimensions
|
- 16 " x 16'' x 16'' D x H x W (400 L × 400 W × 400 mm H)
- Capacity64 liters/ 4100 cubic inches/ 2.37 cubic ft
|
Power
|
- 9500 Watts
- Note Power cable included but without the plug. Please install a plug by your own or click the link left the picture to choose a plug according to your country or your lab requirement
|
| Current Rating |
|
| Voltage |
- AC 208 - 240 Single phase, 50/50Hz
|
|
Operating Temp Range
|
- 100-1100°C-Max continuously
- 1200°C-Max under an hour
- Note: for using =>1000°C, the furnace block must be placed front chamber.
|
|
Stability at 1000oC
|
|
|
Uniformity at 1000oC
|
- +/- 5°C @300°C and 1000°C in the center 300 × 300 × 300mm area
|
|
Max. Heating Rate
|
|
Temperature Controller
|
-
FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
|
Optional +/- 0.1ºC Controller
|
- MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for detailed information about the MTS02-Y software kit.
- You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW and provide +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
|
Laptop, software & WiFi (Optional)
 
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use.
-
Labview-Based Temperature Control System (EQ-MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000).
-
Note: The software is only compatible with MTI’sTemperature Controller
|
Gas Inlet and Outlet
|
A 1/4'' Barbed Gas Inlet/Outlet is installed on the back of the furnace. |
| Overall Dimensions |
- 750 L × 800 W × 1070 mm H
|
| Shipping Weight & Dimensions |
|
| Warranty |
- One-year limited warranty with lifetime support.
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available at extra cost.
|
Application Notes |
- This furnace is a vacuum-sealed furnace, toxic or explosive materials, and gasses are not recommended for use with this furnace without necessary safety controls and supervision.
- Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
- Optional
-
 click here to choose a crucible  Heavy duty cart for carrying on the furnace
|
| Operation Instructions |
 |
