PTL-SC-6-LD Coating System has been designed to automate the entire process to avoid operator fatigue and errors associated with it. In the manual SILAR process, the operator has to perform hundreds of repetitive dipping into the solution and water. It is very difficult to control dip duration and number of dips in a manual process which can last hours. In the automated unit, the operator just needs to clamp the substrate into the holder and program the controller with required dip cycles and duration.

PTL-SC-6-LD has sample holders of 6 positions for programmable. The dipping speed, dip duration, retrieval speed, and dry duration can be set for each beaker station, and one hot plate on the bottom can heat all breakers up to 80°C.  In this technique, the thin film is deposited on a glass substrate following a chemical technique called successive ion layer adsorption and reaction (SILAR). The technique involves multiple dipping of the substrate in a given solution and D.I. water, both temperatures can be varied from case to case.

Actuator	Stepper motor
Drive Mechanism	Lead screw
Dip Duration	0 - 99 seconds / minutes / hours
Speed Control	Drawing speed adjustable by the digital panel from 1 to 9999 μm/s or from 1 to 12 mm/s for each breaker station independently
Number of Cycles	1 - 999
Power Input	Single-phase 208-240VAC, 50/ 60Hz 600 W max. (with heater) Power cable included but without the plug. Please install a plug on your own or click the link to choose a plug according to your country or your lab requirement.
Stroke Length Max.	75 mm
Sample Holder	Three sets of sample fixture can load up to 18 samples (each sample fixture can hold 6 sample slide) Six 150ml glass beakers are included for immediate use
Control Unit	Speed control via the LED display with 8 programs memory Temperature control by a digital controller with +/-1°C accuracy up to 80°C ( Bottom heating plate for all breakers )
Product Dimensions
Warranty	One year limited with lifetime support
Compliance	All electric components are UL certified and the machine is ready to pass TUV, CSA or UL test at extra cost
Operation Instructions
Application Notes	In order to get better film coating, the substrate shall be treated by plasma cleaner (Please click on the first picture below for more information) Click here to visit our Knowledge Center and learn about dip coating Please put the coater into a fume-hood as the pic below right,  if liquid releases vapor
Net Weight	50 lbs
Shipping Weight	145 lbs
Shipping Dimension	40" x 30" x 35"