Aluminum Laminated Film for Pouch Cell Case, 480mm W x 7.5 m L x0.115mm T - alf-480-7.5M
Aluminum Laminated Film for Pouch Cell Case, 480mm W x 7.5 m L x0.115mm T - alf-480-7.5M
22 in stock
Regular price
$339.00 USD
Regular price
Sale price
$339.00 USD
Unit price
per
SKU: : \ALF48075
Couldn't load pickup availability
This aluminum laminated film (115 um ) is used as casing material for polymer Li-Ion battery.
Specifications
Layers from outside (Shiny) to inside (Mat)  |
Polyamide (JIS Z1714): 0.025mm (+-0.0025mm) Adhesive (Polyester-polyurethane): 4-5 g/m2 Aluminum foil (JIS A8079,A8021): 0.040mm (+-0.004mm) Adhesive (Urethane-free Adhesive): 2-3 g/m2 Polypropylene: 0.040mm (+-0.004mm) |
| Thickness: | 115μm±5% |
| Width | 480mm |
| Length | 7.5m |
| Surface quality | Mat finish |
| Pinholes | Subject to the applicable aluminum foil standard |
| Impurity | 1mm or less in diameter |
| Fish Eye | 2mm or less in diameter (clear),1mm or less in diameter (colored) |
| Molding Depth | ≥5.0mm |
| Electrical Insulating | Good |
| Hot Sealing Coniditon | 180-190°C |
| Moisture Vapor / O2 Transmission Rate | 200ppm / 5 years |
| Laminate Strength | Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
| Heat Seal Strength | More than 22.5N/15mm wide at 200 x 0.2Mpa x2 sec by MTI's heat sealing equipment MSK-140 and MSK-115A (Updated from VS-300) |
| Solvent Retention | Less than 5mg/m2 |
| Appearance | Within the sample of the limit |
| Slip Factor | CPP/CPP less than 1.0 |
| Shipping | One box: 3 lbs with 16x8x8" dimension |
| Application Notes & Video |
Click the picture below to see the finished polymer Li-Ion battery made by heated sealer
|
×
Manufacturer Part Number: