Layers from outside to inside

(Material in bracket)

• Polyamide (JIS Z1714): 0.025mm(+-0.0025mm)
• Adhesive (Polyester-polyurethane): 4-5g/m2
• Aluminum foil (JIS A8021): 0.040mm(+-0.004mm)
• Adhesive (Urethane-free Adhesive): 2-3g/m2
• Polypropylene: 0.040mm(+-0.004mm)

Thickness:

• 111μm±11μm

Width

• 100mm

Length

• 210mm

Surface quality

• Matt finish

Pinholes

• Subject to the applicable aluminum foil standard

Impurity

• 1mm or less in diameter

Fisheye

• 2mm or less in diameter(clear),1mm or less in diameter(colored)

Moisture Vapor / O2 Transmission Rate

• 200ppm / 5 years @ 300K

Laminate strength

• Nylon/Al more than 2N/15mm
• Al/CPP more than 5N/15mm

Heat seal strength

• More than 29.4N/15mm wide at 200x 0.2Mpa x2 sec by MTI's heat sealing equipmentMSK-140 and MSK-115A (Updated from VS-300)

Remained solvent

• Less than 5mg/m2

Appearance

• Within the sample of the limit

Slip factor

• CPP/CPP less than 1.0