• Battery Powered Vacuum Calibration Set with Smart Charger (2.8A) - EQ-VCS
1 1

Battery Powered Vacuum Calibration Set with Smart Charger (2.8A) - EQ-VCS

Battery Powered Vacuum Calibration Set with Smart Charger (2.8A) - EQ-VCS

Low stock: 1 left

$854.95 USD
$854.95 USD
Sale Email for Lead Time

SKU: EQ-VCS
View full details

EQ-VCS is a battery powered vacuum calibration set with a rechargeable battery and smart charger. The NIST traceable anti-corrosive digital vacuum gauge come with a 25.9V
Li-Ion Battery pack provide a easy solution to monitor or calibrate the vacuum pressure inside the vacuum storage chamber. 

  
SPECIFICATIONS
Complete Package includes
   
  • One Digital Vacuum Guage
  • 25.9V Li-ion/Polymer Rechargeable Battery Pack
  • Smart Charger (2.8A) for 25.9V Li-ion/Polymer Rechargeable Battery Pack

Vacuum Gauge Features
  • Convection enhanced Pirani vacuum gauge module with on-board controller.
  • Wide measurement range 10-4 to 1000 Torr.
  • Bright LED digital display with measurement unit torr /mtorr.
  • Includes built-in digital display, set-point relay, analog output.
  • 9 pins D connector and battery power supply.
Measurement Range (signal) 

Display 
  • 3 digit LED from 999 Torr to 10.0 mTorr 
  • 2 digit LED from 9.9 mTorr to 1.0 mTorr
  • 1 digit LED from 0.9 mTorr to 0.1 mTorr
Anti-Corrosive Materials  Platinum-plated tungsten
Operating Temperature 0 to +40ºC

Input Voltage
  • Vacuum gauge: 11 to 30 VDC
  • Charger: 100- 240VAC, 50/60 Hz
Output Voltage
  • Charger: 29.4VDC
  • Battery Pack: 25.9V (working)   29.4V ( peak)   
Charging current
2.8A
Battery Capacity to use >= 3650 mAh ( 94.5 wh)
Protection
  • Over-Voltage / Wrong Polarity Protection
  • Built in IC to cut off power automatically when battery is fully charged at 29.4V


Dimensions
  • Digital Vacuum Gauge Dimensions: 104.7mm(L)x 48.3mm(W)x 32.0mm(H)
  • Smart Charger Dimensions: 172mm(L) x 70mm(W) x 42mm(H)
  • Battery Pack Dimensions: 142mm(L)x 48mm(W)x 52mm(H)
             
Weight 5Lb


Application Notes
  • During the charging process Must connect AC plug to the wall before connecting to battery pack.
  • You must calibrate "Zero Point" under 10-4 Torr before measuring vacuum system from 10-4 - 10-3 Torr, otherwise, the gauge may not display accurately in that range. For detailed calibration procedure, please refer to the operation manual below.
  • MTI can help customer finish the "Zero Point" calibration before shipping upon customer's special request at extra $100.
  • Anti-corrosive version gauge can be used for aggressive gases such as Hydrogen sulfide, ammonia, etc.
Operation Manual

Certification
  • CE / UL Listed for Smart Charger 
  • CE Certified for Vacuum Gauge
  • UN38.3 Passed for Battery Pack
Warranty
  • One year limited with lifetime support for Vacuum Gauge
  • 30 days for Battery Pack
×

Manufacturer Part Number: