1 6

15 mm Dia LiNiCoMnO2 (Ni:Co:Mn=8:1:1, NCM811) Single Side Coated Cathode Electrode Disk for CR20XX Coin Cells 100 pcs/ pack - bcaf-NCM811-15

15 mm Dia LiNiCoMnO2 (Ni:Co:Mn=8:1:1, NCM811) Single Side Coated Cathode Electrode Disk for CR20XX Coin Cells 100 pcs/ pack - bcaf-NCM811-15

Out of stock

$248.00 USD
$248.00 USD
Sale Email for Lead Time

SKU: bcaf-NCM811-15
View full details

bcaf-NCM811-15 is a pre-cut LiNiCoMnO2 (Ni:Co:Mn=8:1:1, NCM811) coated cathode electrode for CR20XX coin cell battery R&D and split testing


SPECIFICATIONS:
Material
  • NCM811 Coated on Aluminum Foil
Diameter
  • 15 mm
Coating Thickness
  • 38.2 um (total thickness with Al foil is ~55 um)
Coating
  • Single side coating
Aluminum foil
  • Thickness 16 um
Coating Area Density
  • 10.5 ± 0.20 mg/cm2
Compaction Density
  • 2.75±0.1g/cm3 
Active materials Mass Proportion
  • 95% (PVDF and Super P is 2% and 3%, respectively)
Capacity
  • 190 mAh/g (0.1 C, 3.0-4.3 V vs Li/Li+, Half Cell] [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC])
Operation
  • The package must be opened inside a glove box with Argon Gas and moisture less than 2%RH.
  •
Note
  • This product is not manufactured by MTI. We only sell small quantities to research for developing new materials. If you have any questions on IP conflict, we will forward your inquiry to the manufacturer. 

 

×

This product is a consumable product and all consumable products are NOT covered by MTI's warranty. Make sure to inspect for defect(s) thoroughly before use. 

Manufacturer Part Number: